Lead Free Information
The circuit boards used in these models have been processed using Lead Free
Solder. The boards are identified by the LF logo located close to the board
designation.
Figure 4: LF Logo
Handling the FLEXIBLE FLAT CABLE (FFC)
When you insert / pull out FFC, please grasp a reinforcement board and main
body of FFC
KDL-32R320C/325C/327C, 40R375C/377C
Figure 5: LF logo on circuit board
Please hold reinforcement board and plunge
it to depths.
< Insertion>
SAFETY CHECK-OUT
Please pull out FFC while pushing the
button of both ends at the same time.
<Pull out>
9