Advertisement
16
www.aeg.com
blinking, it indicates a temporary loss of WiFi
connectivity – please refer to the AEG App
for more details.
To manually initiate the onboarding process.
Press " " for 5 seconds.
Note: Download our AEG App and follow
the step-by-step onboarding instructions
to bring the unit online.
Bluetooth
The unit uses Bluetooth when onboarding.
Make sure to have the mobile phone's
Bluetooth turned on when onboarding.
Scheduler
To show a scheduled event from the app
is running.
If the display reads "AS", the ambient
temperature sensor has failed. Contact
your Authorized AEG Service Center.
If the display reads "ES", the evaporator
temperature sensor has failed. Contact
your Authorized AEG Service Center.
If the display reads "L3", the condenser
DC fan motor has failed. Contact your
Authorized AEG Service Center.
If the display reads "P1", bottom tray is
full. Turn off and unplug the unit, then
carefully move the unit to a drain
location. Remove the bottom drain plug
and let the water drain away. Restart the
unit until the "P1" symbol disappears. If
error repeats, call for service.
If the display reads"E4", the communication
between display PCB and main control PCB
is faulty. Contact your Authorized AEG
Service Center.
Continuous Drainage
Dry
(Fig.8)
Note:
Heat
(Fig.9)
(Fig.8)
(Fig.9)
Advertisement
