Advertisement
Introduction
When plugging in or unplugging the adaptor, make sure it is oriented correctly and grasp it at the tabs on either side as shown in the illustration. Note that the correct orientation of the adaptor depends on the instrument you are plugging into. For more information, see your instrument's user documentation.
Plugging this Wireless MIDI & audio adaptor into a supported CASIO instrument provides Bluetooth connectability for Audio and MIDI data. For information on supported instruments, smart devices and apps, visit the CASIO website below.
https://web.casio.com/emi/wireless/
Connecting the Adaptor
For operation details, refer to the user documentation for the instrument and apps you are using.
- Check to make sure that the instrument you are connecting to is turned off.
- Plug the adaptor into the USB-A port of the instrument.
- Refer to the illustration above.
![]()
When plugging in or unplugging the adaptor, grasp it as shown in the illustration above. Failure to do so can cause damage or malfunction.
- Refer to the illustration above.
- Turn on the instrument.
- Depending on your instrument model, you may need to turn on its Bluetooth. For information about how to
- Pair the adaptor with your smart device.
- If you are using MIDI, use your app to connect with "WU-BT10 MIDI".
- If you are using Audio, use your smart device's pairing function to connect with "WU-BT10 Audio".
Troubleshooting
Problem: The connection drops out.
Solution: If there is another device with the same frequency bandwidth nearby, move it further away.
Problem: I can't pair the adaptor with my smart device.
Solution: Check to make sure the instrument's Bluetooth is turned on.
- See the website shown above for the latest support information.
Product Specifications
- Model: WU-BT10
- Dimensions: 22.6 mm(W) × 36.6 mm(H) × 24.2 mm(D)
- Weight: Approximately 8.0 g
- Connector: USB-type A
- Power Supply: USB bus power
- Power Consumption: 0.25 W
- Bluetooth Version: 5.0
- Supported Profile: A2DP (Audio), GATT (MIDI over
- Bluetooth Low Energy) Supported Codec: SBC
- Wireless Output: Class1
- Transmission Frequency Range: 2402 to 2480 MHz
For the latest information about supported operating systems, visit the website at the URL at the top of these instructions.
VideosSetting up the WU-BT10 Bluetooth adapter with the Casiotone CT-S1 Video
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Casio WU-BT10 - Wireless MIDI & Audio Adaptor Connection Guide
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the WU-BT10 that isn't answered in the manual? Leave your question here.