NETGEAR XE103 User Manual page 13

a. Plug the blue Ethernet cable that came in the box into a LAN port on your router or switch
in your network.
Wall-Plugged Ethernet Adapter XE103
Figure 1-5
b. Plug the PowerLine adapter into an electrical outlet near the router.
c. Plug the other end of blue Ethernet cable that came in the box into the PowerLine adapter.
Check the status lights:
• Power: The power LED turns solid green. If it does not, see
page 13.
• HomePlug: The HomePlug LED blinks to indicate that the device is connected to the
power line, and that no other PowerLine devices have been detected at this stage.
• Ethernet: The Ethernet LED blinks to indicate activity. If not, make sure that the
Ethernet cable on the PowerLine adapter that you connected in the previous step is
securely attached to the PowerLine adapter and the router, that the router is connected
to the modem, and the router and modem are powered on.
d. Make sure that the Internet port of your router is connected to your modem, and that your
computer is either connected to a LAN port on the router or to a port on the PowerLine
adapter.
XE103 Wall-Plugged Ethernet Adapter User Guide
router
power LAN Internet
ports
v1.1, March 2007
"Troubleshooting" on
5