Honda ACCORD Hybrid 2023 Owner's Manual page 187

■
Storing a Position in Memory
Memory
Button 1
Memory
Button 2
SET Button
■
Recalling the Stored Position
Memory Buttons
* Not available on all models
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
1. Set the power mode to ON. Adjust the
driver's seat to the desired position.
2. Press the SET button.
u The SET button indicator light will come
on.
3. Press memory button ( 1 or
seconds of pressing the SET button.
You will hear the beeper, and the SET
u
button indicator light goes off.
1. Put the transmission into ( P .
2. Apply the parking brake.
3. Press a memory button ( ( 1 or
The seat will automatically move to the
memorized position.
1Driving Position Memory System
The transmitter settings may not be switched when
you change owner accounts.
If this happens, change to a different account and
then try switching to the desired account again.
For details, please refer to the following page.
2 Switching Users P. 293
( 2 within five
NOTICE
When the door is opened, the driver's seat moves to
the seat position of the account that last used the
transmitter.
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
( 2 ).
seconds.
•
You readjust the seat position before the double-
beep.
•
You set the power mode to any position except
ON.
1Recalling the Stored Position
The seat will stop moving if you:
•
Press the SET button or memory button
•
Adjust the seat position.
•
Put the transmission into a position other than
*
*
( 1 or ( 2 .
( P .
185