NETGEAR PS104 Installation Manual page 6

Rear Panel
The rear panel of the Model PS104 Print Server and Model PS105 Print Server
has one parallel PRINTER port, and the rear panel of the Model PS110 Print
Server has two parallel ports for printers (PRINTER 1 and PRINTER 2). These
printer ports accept either printers or other parallel devices such as a plotter.
Number of Ports
10BASE-T
BNC
Autosensing 10/100BASE-T
Parallel Printer Port
All models have a power adapter receptacle that accepts a 12 V DC power
adapter.
PRINTER
(parallel) port
Rear Panel of the Model PS104 Print Server
PRINTER
(parallel) port
Rear Panel of the Model PS105 Print Server
PRINTER 2
(parallel) port
Rear Panel of the Model PS110 Print Server
Normal/Uplink Push Button (Model PS104 and Model PS105 Only)
The Normal/Uplink push button on the Model PS104 and Model PS105 print
servers allows you to select Normal (MDI-X for connecting to a PC) or Uplink
(MDI for connecting to a hub or switch) wiring for the first 10BASE-T port,
eliminating the need to use a crossover cable. The other10BASE-T ports on the
Model PS104 and Model PS105 print servers are permanently configured for
Normal wiring; the one network port on the Model PS110 Print Server is
permanently configured for Uplink wiring.
Model PS104/PS105/PS110 Print Server Installation Guide
PS104
4
n/a
n/a
1
4 10BASE-T
Power adapter
ports
receptacle
NETWORK
4 3 2 1
PRINTER 12VDC 1.2A
Normal/Uplink
Normal/Uplink push button
4 10BASE-T
Normal/Uplink
ports
push button
NETWORK
5 4 3 2 1
PRINTER 12VDC 1.2A
Normal/Uplink
Power adapter receptacle
10BASE-T connectors
PRINTER 1
10/100BASE-T
(parallel) port
port
NETWORK
12VDC 1.2A
PRINTER 2 PRINTER 1
Power adapter receptacle
PS105 PS110
4 n/a
1 n/a
n/a 1
1 2
BNC
port
9000FA