NETGEAR GA511 User Manual page 16

User Manual for the NETGEAR 10/100/1000 Mbps CardBus Adapter GA511
N ,
EXT INSTALL THE
C B A
ARD US DAPTER
Locate an available CardBus slot on the
a.
side of your notebook. Hold the PC Card
with the NETGEAR logo facing up and
insert it into the CardBus slot.
Note: Do not use excessive force, but
make sure the card is fully inserted into
the slot.
A Found New Hardware Wizard dialog
b.
box appears, indicating that Windows
has found the adapter. Accept the "Install
the software automatically" setting, and
click Next to proceed.
Note: If Windows XP or 2000 displays a
Windows XP Logo Testing or a Digital
Signature Not Found warning, click
Continue Anyway or Yes to proceed.
Click Finish to complete the installation.
c.
If prompted to restart the computer,
remove your adapter CD from the
CDROM drive and click OK. You will
see the GA511 Smart Wizard icon on the
lower right of the Windows task bar.
3-4
GA511 G
IGABIT
.
Windows Found New Hardware Wizard
Local Area Connection Icon before you connect a
network cable
GA511 System Tray icon
For assistance with configuring the network
settings, please see the networking tutorials on
the NETGEAR Adapter Resource CD.
Basic Setup