Advertisement
Advertisement
Related Manuals for NETGEAR ProSafe GS116
Summary of Contents for NETGEAR ProSafe GS116
- Page 1 16-port Gigabit Switch 10/100/1000 Mbps GS116 Installation Guide...
-
Page 2: In The Box
Technical Support section. Prepare to Install the Switch Decide where you want to place the switch. Find a flat horizontal surface — such as a table, desk or shelf. The switch comes with wall-mounting screws. You’re welcome to use the screws if you want to hang the switch in an open space on a wall. -
Page 3: Troubleshooting
Also, you’ll need one Category 5 (Cat 5) Ethernet cable with RJ-45 connectors for each device you want to connect to the switch. Each Ethernet cable must be less than 328 feet (100 meters). Install the Switch and Connect the... -
Page 4: Technical Specifications
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the product described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. -
Page 5: Technical Support
©2004 NETGEAR, Inc. NETGEAR, the Netgear logo, ProSafe, Auto Uplink and Everybody's connecting are trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.