Download Print this page

NETGEAR ProSafe GS108T-200 Datasheet page 2

8-port gigabit smart switch

Advertisement

ProSafe
8-Port Gigabit Smart Switch
®
Connects to
optional power
adapter (located
on back)
Technical Specifications
• Network Protocol and Standards
Compatibility
– IEEE 802.3i 10BASE-T
– IEEE 802.3u 100BASE-TX
– IEEE 802.3ab 1000BASE-T
– IEEE 802.3x full-duplex flow control
• Power Supply
– Power consumption: 6W maximum
• Network Ports
– 8 10/100/1000 Mbps auto sensing
Gigabit Ethernet
• Physical Specifications
– Dimensions: (W x D x H)
158 x 105 x 27 mm
(6.2 x 4.1 x 1.1 in)
– Weight: 0.56 kg (1.23 lb)
• Performance Specifications
– Forwarding modes: Store-and-forward
– Bandwidth: 16 Gbps full duplex
– Network latency: Less than 15 μs for
64-byte frames in store-and-forward
mode for 1000 Mbps to 1000 Mbps
transmission
– Buffer memory: 128 KB embedded
memory per unit
– Address database size: 4k media
access control (MAC) addresses
per system
– Mean time between failures (MTBF):
278,553 hours (~32 years)
– Acoustic noise: 0 dB
• Electromagnetic Emissions
– CE mark, commercial
– FCC Part 15 Class B
– VCCI Class B
– C-Tick
Cable/DS L
modem
Connects
Connects to server
to server
ProSafe VPN Firewall
(FVS318G)
Connects to ProSafe 24-port
10/100/1000 Smart PoE Switch (GS724TP),
which provides power to the PSE switch
• Environmental Specifications
– Operating temperature: 32° to 122° F
(0° to 50° C)
– Storage temperature: -4° to 158° F
(-20° to 70° C)
– Operating humidity: 90% maximum
relative humidity, non-condensing
– Storage humidity: 95% maximum
relative humidity, non-condensing
– Operating altitude: 10,000 ft
(3,000 m) maximum
– Storage altitude: 10,000 ft
(3,000 m) maximum
• Status LEDs
– Per port: Link/activity, speed
– Per device: Power
• Power Adapter
– 12V, 1.0A power adapter, localized to
country of sale
– Alternatively, unit can be powered by
IEEE 802.3af PSE via Ethernet port
• Electromagnetic Immunity
– EN 55024
• Safety
– CE mark, commercial
– cUL IEC 950/EN 60950
– CB
• Administrative Switch Management
– IEEE 802.1Q Static VLAN
(64 groups, Static)
– Protected ports
– IEEE 802.1p Class of Service (CoS)
– Port-based QoS
– DSCP-based QoS
– DiffServ
– IEEE 802.3ad Link Aggregation
(manual or LACP)
– IEEE 802.1w Rapid Spanning Tree
Protocol (RSTP)
802.11g Wireless
Access Point
(WG103)
Connects to
Desktop PCs
1
Connects
to Laptops
– IEEE 802.1s Multiple Spanning Trees
Protocol (MSTP)
– IEEE 802.1ab Link Layer Discovery
Protocol (LLDP)
– LLDP-MED
– SNMP v1, v2c, v3
– RFC 1213 MIB II
– RFC 1643 Ethernet Interface MIB
– RFC 1493 Bridge MIB
– RMON group 1, 2, 3, 9
– Auto voice VLAN
– DHCP Filtering
– Auto denial-of-service (DoS) protection
– HTTP and HTTPS
– Ping and traceroute
– Green features: Power saving by cable
length (<10 m)
– Power saving when link down
– RFC 2131 DHCP client
– DHCP filtering
– IEEE 802.1x with Guest VLAN
– Jumbo frame support
– Port-based security by locked MAC
addresses
– MAC and IP-based ACL
– Storm control for broadcast, multicast
and unknown unicast packets
– IGMP snooping v1/v2
– Port-based egress rate limiting
– SNTP
– Port mirroring support (Many to one)
– Web-based configuration
– Configuration backup/restore
– Password access control
– TACACS+ and RADIUS support
– Syslog
– Firmware upgradeable
GS108T

Advertisement

loading

This manual is also suitable for:

Prosafe gs108tv2