Shared access to the internet across multiple routing vlans using a prosafe firewall (17 pages)
Summary of Contents for NETGEAR ProSafe FSM7328S
Page 1
VLAN 3 being the Users PC domain VLAN 2 being the Internet domain Network Diagram: Physical Setup: 1x FSM7328S Prosafe Layer 3 Managed switch - Firmware 6.0.0.15 4x Windows XP Computers (2x on each VLAN) 1 x FVS___ Prosafe Firewall Router Logical Setup: FVS___ : 192.10.10.1/24...
Set the Management IP address 1) Plugged the console cable to the Serial port of the switch and the serial port on the 2) Open a new Hyper Terminal session (connecting via the COM port) – settings 9600, 8 , None , 1, None...
Page 3
WEB GUI instructions Creating a Routing VLAN2 and Routing VLAN3 via the SmartWizard 1) Access the GUI 2) Browse to Smart Wizard – VLAN routing Wizard 3) Assign the VLAN ID 4) Select the port(s) members of the VLAN (Use CTRL to select multiple ports) 5) Assign the VLAN IP address and Subnet Mask...
Page 4
6) Click on Submit. The following statement should be prompted. 7) Perform point 1-6 to create VLAN3 (with relevant IP address) 8) The following summary should be obtained:...
Page 6
VLAN IP address for each of the other VLANS on the switch that require Internet access. For example in this case the FVS Firewall must contain the following route: 192.10.11.0 (Subnet) 255.255.255.0 (Subnet Mask) 192.10.10.254 (Default Gateway).