NETGEAR ProSafe FSM7226RS Datasheet

Powerful
Easy-to-use
Outstanding Value
Work Space Friendly
/
24 7
T E C H N I C A L
S U P P O R T*
1-888-NETGEAR (638-4327)
Email: info@NETGEAR.com
ProSafe 24- and 48-port 10/100 L2 Managed
®
Stackable Switch with 2 Combo Gigabit Ethernet Ports
FSM7226RS, FSM7250RS
Only Fast Ethernet SMB Solution in the Industry with Dedicated High-speed
Stacking Ports!
NETGEAR's low-cost, stackable, Fast Ethernet switches deliver maximum throughput and
flexibility where you need it — to high-density workgroups at the edge of the network, or in the
backbone of small networks. The ProSafe FSM7226RS and FSM7250RS are managed 24-port and
48-port switches with auto-sensing 10/100 ports and two 10/100/1000 ports. This enables fiber
connectivity through two hot-swappable small form-factor pluggable (SFP) Gigabit interfaces.
The non-blocking design of the switches delivers simultaneous, full wire-speed, low-latency
throughput to all ports. In addition, their 1U rack-mount form factor uses less rack space and
provides a lower per-port cost than comparable Fast Ethernet switches.
Static routing ensures reliable routing between VLANs and network segmentation where and when
you need it, at no additional cost. Plus, two high speed (10 Gbps) dedicated stacking ports in the
back provide extra bandwidth for stacking application. A single stack can have up to 8 units and 384
ports, providing a very scalable and easy to use solution.
Robust security features include IEEE 802.1x port-based authentication and access control lists
(ACL), ensuring that only authorized users can access your network. Secure management of the
switches is available through Secure Sockets Layer (SSLv3) for the Web GUI and Secure Shell
(SSH) for command-line sessions. Additionally, multiple switches can be securely managed via
SNMPv3 with NETGEAR's ProSafe Network Management Software NMS100. For workgroup
deployments in cost-sensitive organizations that require Layer 2 switching, the flexibility of
stacking and additional Gigabit capability, NETGEAR's ProSafe 10/100 Layer 2 Stackable
switches deliver the ideal access-edge solution.
In desktop switching environments, wire-speed performance with full QoS control for all
10/100 interfaces is critical. The 2 Gigabit Ethernet combo interfaces provide unprecedented
flexibility, whether you are stacking between switches, attaching bandwidth-thirsty file servers,
or aggregating critical data to the core of your network.
Simplify and reduce IT staff workload and mean time to repair with intuitive, GUI-based device
configuration, and an industry-standard command-line interface (CLI). New 10 Gbps,
high-speed stacking capabilities allow you to build a single IP manageable device with up
to eight switches.
With their high-value price point, flexible design, and reduced maintenance requirements,
NETGEAR's ProSafe 10/100 Layer 2 Stackable Switch solutions yield a high return on
investment, and are ideal for delivering highly reliable, converged voice, video, and data
services over a single network infrastructure.
The switch has a built-in thermal sensor to automatically speed up the fan to increase air
flow in warm environments, and slow down the fan to reduce the noise when operating in
an office environment.
Data Sheet
*