Transporting Lithium Batteries - AEG ALT58BC401 Original Instructions Manual

Hide thumbs Also See for ALT58BC401:
Table of Contents

Advertisement

d) is
BATTERIES
bout
Battery packs that have not been used for some time should be recharged
before use.
The
Temperatures in excess of 50°C (122°F) reduce the performance of the battery
pack. Avoid extended exposure to heat or sunshine (risk of overheating).
ther
The contacts of chargers and battery packs must be kept clean.
. Do
ions
For an optimum lifetime, the battery packs must be fully charged after used.
To obtain the longest possible battery life, remove the battery pack from the
charger once it is fully charged.
For battery pack storage longer than 30 days:
ct to
Store the battery pack where the temperature is below 27°C and away
from moisture.
and
Store the battery packs in a 30% - 50% charged condition.
duct
Every six months of storage, charge the pack as normal.
alts.

TRANSPORTING LITHIUM BATTERIES

Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
nt or
Transportation of those batteries must be done in accordance with local,
national, and international provisions and regulations.
The user can transport the batteries by road without further requirements.
Commercial transport of lithium-ion batteries by third parties is subject to
e to
Dangerous Goods regulations. Transport preparation and transport are
may
exclusively to be carried out by appropriately trained persons and the
have
process must be accompanied by corresponding experts.
our
When transporting batteries:
Ensure that battery contact terminals are protected and insulated to
and
prevent short circuit.
vice,
Ensure that the battery pack is secured against movement within
hen
packaging.
Do not transport batteries that are cracked or leaking.
Nm
Check with forwarding company for further advice.
lt in
nger
SYMBOLS
any
Safety alert
. For
Read and understand all instructions before
eter
operating the product. Follow all warnings and safety
instructions.
o its
Wear eye, ear, and head protection.
that
ised
Wear non-slip safety footwear when using the product.
vals
king
d or
Wear non-slip, heavy-duty gloves.
d or
Do not expose the product to rain or damp conditions.
Beware of thrown or flying objects. Keep all
bystanders, especially children and pets, at least 15 m
away from the operating area.
Keep hands away from the cut-off blade.
Class II tool, double insulation
Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. Check with your local authority or retailer for
recycling advice.
The product is not intended for use with a toothed saw
type blade.
Beware of blade thrust.
Regulatory Compliance Mark (RCM). Product meets
applicable regulatory requirements.
The blade appropriate for the product and suited for
cutting pulpy weeds and vines.
Rotational direction and maximum speed of the shaft
7,500
for the cutting attachment.
101
Line trimmer
Guaranteed sound power level
105
Brushcutter
Guaranteed sound power level
The following signal words and meanings are intended to explain the levels of
risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury.
CAUTION
Without safety alert symbol
Indicates a situation that may result in property damage.
41
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alt58bcA58bct18

Table of Contents