Table of Contents
Advertisement
To set the system selection, press
Select one of the following system settings.
Standard
Press 1 to set your system selection to Standard (Home and
Roam). The Standard setting allows the phone to first search for
an available channel in the home system. If the phone cannot find
an available channel in the home system, the phone searches for
an outside or roam system. The roam indicator, $, and the roam
system type indicator, / or %, are displayed when your phone
accesses an outside or roam system.
Home Only
Press 2 to set the system selection to Home Only. The Home
Only setting restricts the phone to search for an available channel
in the home system only. If the phone cannot locate an available
channel in the home system, the phone enters a no service status
until a channel within the home system is again located.
System A Only
Press 3 to set the system selection to System A only. The Sys-
tem A only setting restricts the phone to search for an available
channel in the home system or a roam system within System A
Only.
System B Only
Press 4 to set the system selection to System B only. The Sys-
tem B Only setting restricts the phone to search for an available
channel in the home system or a roam system within System B
Only.
Select Phone Number
Your phone can be programmed with up to two phone num-
bers. If two phone numbers are programmed into the phone,
you can select the desired phone number to use by pressing
M453
. Press
phone number selection (No.1 or No. 2.). Press
the select phone number menu.
Menu Shortcut
Clock
M46
Menu Shortcut
Set Clock
M461
The clock can be set with the time, date, and year. See
"Setting the Time and Date" on page 8.
Set Alarm, Auto On, Auto Off
Your phone can be used as an alarm clock, and your phone
can be set to automatically turn on or off at a specified time
each day. To access the alarm or the auto on/off selections,
M462
press
M452
Menu Shortcut
M453
B
E
or
to highlight the
N
Menu Shortcut
M462
.
23
-
-
.
to exit
Advertisement
Table of Contents
