Download Print this page
Panasonic ET-LAD12K Operating Instructions
Panasonic ET-LAD12K Operating Instructions

Panasonic ET-LAD12K Operating Instructions

Replacement lamp unit for dlp projectors

Advertisement

Quick Links

 
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used
electrical and electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points, in accordance with your national legislation and the Directives 2002/96/
EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and
prevent any potential negative effects on human health and the environment which could otherwise
arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your
local municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact
your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
Read these instructions completely before operating this unit.
Operating Instructions
Replacement lamp unit
for DLP
Projectors
®
ET-LAD12K (1 pc)
Model No.
ET-LAD12KF (4 pcs)
Commercial Use

Advertisement

loading

Summary of Contents for Panasonic ET-LAD12K

  • Page 1 Replacement lamp unit for DLP Projectors ® Commercial Use ET-LAD12K (1 pc) Model No. ET-LAD12KF (4 pcs) Read these instructions completely before operating this unit. Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
  • Page 2 Precautions with regard to safety Warning Wait until the lamp is cooled sufficiently before replacing the lamp unit. The lamp cover gets very hot, and contact with it can cause burns. Make sure that all four lamp units are installed. Do not remove any screws (such as the black screws) other than those indicated when replacing the lamp unit.
  • Page 3 Replacing the lamp unit If the projector is operating, turn off the power by the following procedure and wait for the lamp unit to cool downbefore carrying out replacement. If the lamp monitor (LAMP 1 - LAMP 4) is illuminated, if it is necessary to replace the associated lamp.
  • Page 4 Operating Instructions (“Cleaning and replacement of air filter”). Clean the air filter (filter cleaning unit, movable metal mesh filter and brush) at the same time. Accessory Static electric mesh filter Web Site : https://panasonic.net/cns/projector/ Printed in Japan 4 - ENGLISH...

This manual is also suitable for:

Et-lad12kf