Table of Contents
Advertisement
EN
Control panel
Thermostat
Before using the appliance, ensure all thermostats are at the "0" position.
During operation, take care of your rings, watches and similar objects as they may become
hot.
Operation
1. Place suitable cookware on to the centre of the desired cooking zone.
2. Switch the appliance on at the power supply.
3. Set the thermostat to desired power setting. The appliance will start to work and the operating
indicator light will light up Green. (Note: If unsuitable cookware or no cookware is present,
the heating indicator light will light up Red.)
Level
1
Power (W)
900 1000 1100 1200
4. To turn appliance off, just set the thermostat to "0".
Auto shut-off function
The appliance will shut off automatically when left idle for about 4 hours.
Overheat protection function
If the pan becomes too hot the appliance will switch off and a buzzer will sound. Should this happen,
allow the appliance to cool before restarting.
Cleaning, Care & Maintenance
•
Turn the appliance off and disconnect from the power supply. Allow the appliance to cool
before cleaning and maintenance.
•
Use warm, soapy water and a damp cloth to clean the appliance.
•
DO NOT use abrasive cleaners or pads.
•
Dry thoroughly after cleaning.
•
For optimal product performance, it is recommended to regularly apply some vegetable oil to the
cooking surface.
6
CU487-CU488_EN_A5_v1_20221213.indb 6
CU487-CU488_EN_A5_v1_20221213.indb 6
Operating indicator light
2
3
4
5
1400
1700 2000
6
7
8
9
10
2300
2700 3100
Model: CU488
11
3500
2022/12/13 13:31
2022/12/13 13:31
Advertisement
Table of Contents
