Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HIKVISION Hik-Gateway
Summary of Contents for HIKVISION Hik-Gateway
- Page 1 Hik-Gateway User Manual...
- Page 2 SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
- Page 3 Hik-Gateway User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could...
-
Page 4: Table Of Contents
4.1.2 Change Password for Admin User ................10 4.2 System Maintenance ......................11 4.3 Network Settings ........................11 4.3.1 Edit Port ........................11 4.3.2 Set NIC for Hik-Gateway ....................12 4.3.3 Set NAT ........................12 4.3.4 Set HTTPS ........................12 4.4 ARC Settings ......................... 13... -
Page 5: Chapter 1 Overview
ARC. This manual guides you to configure the Hik-Gateway service. To ensure a proper usage and stability of the Hik-Gateway service, refer to the contents below and read the manual carefully before installation and operation. -
Page 6: Chapter 2 Installation
Hik-Gateway User Manual Chapter 2 Installation You can install the Hik-Gateway service to your server or PC, and activate the service. Then you can use the service remotely. 2.1 Port Instruction Before installing Hik-Gateway service, ensure the default ports of the Hik-Gateway are not used by other services, otherwise the Hik-Gateway service will be unavailable. -
Page 7: Activate Hik-Gateway
Note If you install Hik-Gateway remotely, you need to log into the local computer to show the Watchdog service. 2.3 Activate Hik-Gateway By default, Hik-Gateway predefined the administrator user named admin. When you log in to Hik- Gateway for the first time, you are required to create a password for the admin user to activate Hik-Gateway before you can properly configure and operate. - Page 8 Hik-Gateway User Manual three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.
-
Page 9: Chapter 3 Device Management
Encoding devices (including mobile device, body camera, portable speed dome, etc) and security control panels can be added to the Hik-Gateway via the Web Client. You can manage them on the Web Client, including adding, editing, deleting, refreshing device information, etc. -
Page 10: Add Encoding Devices In A Batch
You can customize the device name. Device ID The Device ID you defined on the device for registering it to the Hik-Gateway service. Note Device Name is optional. The device ID will be used as the device name if you do not enter the device name. -
Page 11: Add Security Control Panel By Ehome Protocol
3.3 Add Security Control Panel by EHome Protocol You need to add security control panel to the Hik-Gateway, so that you can get alarm notification and view alarm-related videos by the ARC connected to the Hik-Gateway. After adding a security... -
Page 12: Add Security Control Panels In A Batch
3.4 Add Security Control Panels in a Batch When there are multiple security control panels to add to the Hik-Gateway, you can enter the device information in a predefined template and then import it to the Hik-Gateway to add them in a batch. - Page 13 Device Name is optional. The account ID will be used as the device name if you do not enter the device name. Account ID The account ID you defined on the device for registering it to the Hik-Gateway service. EHome Key The EHome key you defined on the device for registering it to the Hik-Gateway service.
-
Page 14: Chapter 4 Hik-Gateway Configuration
You can set the system parameters, including admin password and Hik-Gateway name. 4.1.1 Configure Hik-Gateway Name You can view the Hik-Gateway information and edit the Hik-Gateway name according to the actual needs. Perform this task when you need to configure Hik-Gateway name. -
Page 15: System Maintenance
• Only the logs with the log level higher than the configured level can be recorded. • The log level is Warning by default. We recommend setting Debug as the log level to make it easier to find error details. If you select Debug as the log level, the Hik-Gateway performance will be degraded. -
Page 16: Set Nic For Hik-Gateway
Hik-Gateway User Manual 4.3.2 Set NIC for Hik-Gateway For the Hik-Gateway running on the PC with multiple NICs, you need to select one NIC for communication. Steps 1. Click Hik-Gateway Configuration → Network Settings → Access Network to enter the NIC setting page. -
Page 17: Arc Settings
To get alarm notification and alarm-related videos successfully by the ARC connected to the Hik- Gateway, you need to configure the ARC parameters on the Hik-Gateway. Steps Note Only one ARC could be connected to the Hik-Gateway, otherwise the connection between the Hik- Gateway and the ARC will fail. -
Page 18: Select Storage Disk For Alarm-Related Video
When there are triggered alarms, the Hik-Gateway will automatically store the alarm-related videos in the PC, so that you can view the videos by the ARC connected to the Hik-Gateway. You need to configure the storage disk of the videos beforehand. - Page 19 UD14612B...