NEC DiamondPro 2070SB User Manual page 21

Calibrating Your Monitor
–continued
PC VERSION
Hold the color calibrator near the face of the monitor with the suction cup side
facing away from the monitor.
Note: Make sure that nothing is blocking the sensors on the suction cup side of the
color calibrator during this adjustment. The calibrator should be held with nothing
between the sensors and the light source located in the area.
Click "Next" to start this measurement.
Attach the suction cup side of the calibrator to the face of the CRT directly over
the black circle located in the software menu (Figure 3g).
Once the calibrator is attached to the monitor's face click "Next" to complete the
ambient adjustment.
Note: This process should be repeated if the ambient lighting conditions in the
environment change.
Figure 3g
21