Basic Functions
Listening to Radio
Using buttons on the Remote Control
1.
Press the FUNCTION button to select FM.
2.
Tune in to the desired station.
•
Preset Tuning 1 : You must fi rst add a desired
frequency as a preset. Press the STOP ()
button to select PRESET and then press the
TUNING/CH (
station.
•
Manual Tuning : Press the STOP () button to
select MANUAL and then press the TUNING/CH
(
) button to tune in to a lower or higher
frequency.
•
Automatic Tuning : Press the STOP () button
to select MANUAL and then press and hold the
TUNING/CH (
search the band.
Setting Mono/Stereo
Press the MO/ST button.
•
Each time the button is pressed, the
sound switches between STEREO and
MONO.
•
In a poor reception area, select MONO for a clear,
interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 in the memory
1.
Press the FUNCTION button to select FM.
2.
Press the TUNING/CH (
<89.10>.
3.
Press the TUNER MEMORY button.
•
Number fl ashes on the display.
4.
Press the TUNING/CH (
to select preset number.
•
You can select between 1 and 15 presets.
36
English
HT-D450-XY-ENG-1228.indd 36
HT-D450-XY-ENG-1228.indd 36
) button to select the preset
) button to automatically
) button to select
) buttons
5.
Press the TUNER MEMORY button again.
•
Press the TUNER MEMORY button before
number disappears from the display.
•
Number disappears from the display and the
station is stored in memory.
6.
To preset another station, repeat steps 2 to 5.
2011-12-28
2011-12-28
5:48:59
5:48:59