Table of Contents
Advertisement
L
function
INETEST
To enable this function, please move cursor to the ISDN monitor icon and click the right
button and select the Linetest function, then input your own ISDN telephone number.
L
will do the loop back test which test from your site to the ISDN switch, then
INETEST
back to your site.
configuration.
Upgrade Function
To enable this function, please move cursor to the ISDN monitor icon and click the right
button and select the Upgrade function. Please make sure there is no user accessing
this device. Then specify the new firmware file name and its directory by selecting
"Choose" and start the upgrade action by selecting the "Upgrade" . This procedure for
upgrading the device firmware is similar to using the AT@ command details above.
Notes: If you use RVS-COM as CAPI20 application, please install the ISDN CAPI
adapter (access the ISDN device through CAPI interface), not the ISDN
terminal adapter (which accesses the ISDN device through physical COM
port).
L
is used to check the ISDN line installation and TA
INETEST
© COPYRIGHT OF ASUSCOM NETWORK INC.
37
Advertisement
Table of Contents
