Advertisement
Quick Links
1. Device name : VD BT Module
2. Model name : WBA210M
3. General Information
Shape : PCBA Module type
Comm. Protocols : BLE
Weights & Dimensions : Width 26 * Depth 49 * Height 2.7 mm
Product Weight : approximately 5g
Operating Temp : 0 ~ 40︒C
Power Source : External DC 3.3V
The WBA210M is a BLE Transceiver for Home automation networks.
Connected to the TV-remote control device, it acts as a pathway between remote home automation.
Power is provided by External 3.3V power supply with 14pin zip type connector.
Networking
The WBA210M is applied UE878 BLE Transceiver of Universal Electronics.
The BLE transceiver delivers the information received from the remote control device to the main
board with 14pin zip type connector.
Power Source
The WBA210M is powered by an external
14pin zip type connector..
Indication
A general-purpose Red LED is used to communicate various BLE transceiver states.
Expansion Ports
User Manual
3.3VDC@500mA
regulated power source with
Advertisement
Related Manuals for Samsung WBA210M
Summary of Contents for Samsung WBA210M
- Page 1 Power Source : External DC 3.3V The WBA210M is a BLE Transceiver for Home automation networks. Connected to the TV-remote control device, it acts as a pathway between remote home automation. Power is provided by External 3.3V power supply with 14pin zip type connector.
- Page 2 The 14pin zip type connector connects the main control board. 4. Electrical Properties Parameter Description Modulation type GFSK Modulation rate 1Mbps Channel interval 2MHz Antenna gain(Chip Antenna) 1.35dBi ≤2MHz Occupancy bandwidth frequency range 2400MHz~2483.5MHz ≤20×10 Carrier frequency tolerance...
-
Page 3: Antenna Installation
OEM/Integrators Installation Guide Important Notice to OEM integrators 1. This module is limited to OEM installation ONLY. 2. This module is limited to installation in mobile or fixed applications, according to Part 2.1091(b). 3. The separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations 4. - Page 4 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
-
Page 5: Industry Canada Statement
Industry Canada Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. -
Page 6: Plaque Signalétique Du Produit Final
This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains IC: 649E-WBA210M”. Plaque signalétique du produit final Ce module émetteur est autorisé...