HIKVISION DS-KP8000-WHE1 Quick Installation Manual

Redial
1. Press key, redial a call number.
Call Mute
1. Press to Mute the microphone during the call.
2. Press again to un-mute the conversation.
Putting a call on hold
1. Press key or Hold soft key, caller is put on hold.
2. To retrieve the call press key or Resume soft key.
Note: with more than one active call, select desired call with
the navigator keys and use the corresponding soft key to
hold or resume.
Call transfer
Attended transfer:
1. Press key or Xfer soft key during the active conversation,
the call is put on hold.
2. Dial the second telephone number.
3. When the call is answered, then press key or Xfer soft
key to complete the operation.
Blind transfer:
1. Press key or Xfer soft key during the active conversation,
the call will be on hold.
2. Then enter the 2nd telephone number and press
or Xfer soft key.
Call forward
1．Press Menu > Features > Call Forward.
2．Select the line, the type of forward, enter the destination
number and status and OK.
3-party conference
1. Once in line with 1st caller, press key or Conf soft key,
1st caller is put on hold.
2. Then call the 2nd number.
3. After, 2nd call is established, press key or Conf soft key to
set up the conference.
Programmable keys
1．You can configure shortcuts for the programmable keys.
2．Press Menu > Basic > Keyboard, select among the
configurable items, and select your desired type and value,
press OK key.
Do not disturb
1. Press DND soft key, and enable the device do not disturb
mode.
2．Or press Menu > Features > DND, and select the Mode and
Type, and press Save soft key.
Voice mail
1. To access your voice mailbox, press or Menu >
Message > Voice Message, number of messages will be
indicated if provided by your server or pbx.
2．Select the line and press Play to call.
Call list
1. Press key or Menu > CallLog > Local Call Logs
2. Scroll through the list using
3. To dial an entry, press Dial soft key or pickup handset or
press or .
Phonebook
key
Access phonebook:
1. Press or Contact soft key or Menu > PhoneBook
> Local Contacts.
2. Select All Contacts or other group.
3. To dial an entry, press Dial soft key or pickup handset or
press or .
Add new entry:
1. Press Contact soft key, Press All Contacts or other group
> Press Add.
2. Enter name and number and press OK soft key.
- 4 -
IP Phone
Quick Installation Guide
V1.1
P/N:CJBA100136B0