NEC Aspire Quick Reference Manual

Using Your Telephone
Due to the flexibility built into the system,
Dialing Codes Feature
your and
Capacities
may differ from those in this
guide. Check with your Communications
Manager and make a note of any differences.
and/or
These are
keys.
See Programming Function
Keys for more on setting up these
keys.
If you're on a Handsfree Call (see
Handsfree Options below), lift the
handset
for privacy.
Volume Controls
These are for
speaker, handset and ringing calls.
LND
Press CALL1 then to
automatically redial the last number
you called.
L1 L2
CALL 1
1 2 3
CALL 2
4 5 6
DIAL
7 8 9
FLASH
0
MIC
DND
VOL
LND SPK HOLD
Handsfree Options
•
Handsfree
lets you place and answer calls by pressing
•
Automatic Handsfree, you can press a line or Line Appearance key without lifting
With
the handset. Normally, you have Automatic Handsfree.
•
Handsfree Answerback
Use to answer a voice-announced Intercom call by speaking
toward your phone — without lifting the handset.
Message Wait LED
The flashes when you
have Messages Waiting. If you don't have a
Voice Mail key, it also flashes when you have
Voice Mail messages left in your mailbox.
Line Appearance Keys are Intercom keys
for placing and answering calls. If you're busy
on one – just use the other.
Press CALL1, DIAL and dial a bin number for
Common Abbreviated Dialing.
Enable Do Not Disturb to block your calls
when you don't want to be interrupted. This
key will also flash when Call Forwarding
is activated.
Handsfree
Press for calls, or use the
handset instead. See Handsfree Options below.
While on a handset call, press SPK once for
Handsfree; twice for Group Listen.
Microphone
The picks up your voice for
MIC
Handsfree calls. Press to turn off
the microphone.
instead of using the handset.