Cleaning And Maintenance; What To Do If; Technical Data - AEG A4WMSTPN1 Manual

8
Best results are achieved on:
• Fresh stains that have not completely set.
• Stains that have been previously washed but not dried in a dryer or ironed.
• Small stains confined to a small area of the garment.
Less efficient on:
• Set-in or old stains.
• Stains that have been previously washed and dried in a dryer or ironed.
• Large stains, spread across a large area of the garment.
8. CLEANING AND MAINTENANCE
Quick cleaning instructions:
1. Disconnect the connector from the Stain Remover Pen.
2. Dry the cup and the base if it has been filled with water.
3. Clean the tip with a damp cloth.
4. Sto the Pen in its cradle and wind the power cord into a coil.
5. Store the unit in a dry and well-ventilated area.
NOTE: Never use abrasives, alcohol, solvents or any other chemicals to clean the unit.
9.

WHAT TO DO IF...

If there is a fault, first try to find a solution in the troubleshooting table below.
If you cannot find a solution to the problem, contact an after sales customer service centre.
Troubleshooting table
Problem
The unit will not turn
on or has stopped
working
10. TECHNICAL DATA
Product
Model
Colour
Voltage (V)
Power rating (W)
Frequency(Hz)
Net weight (Kg)
Causes
Pre-set cooldown activated.
Plug not properly inserted.
Power button defect.
Stain Remover Pen
A4WMSTPN1
White
220-230
7.0
50-60
0.34 g (0.75 lbs)
Solutions
Wait 1 min and resume
operation.
Plug the power cord into the
unit and the plug into the
power outlet.
Contact an authorised AEG
service center.