Download Print this page

Siemens SICAM 7KG775 Series Product Information page 7

Advertisement

Available languages

Available languages

SIEMENS
Read and understand these instructions and the relevant manual before installing,
operating, or maintaining the device.
Check on our homepage whether a new firmware version is available and update
your firmware if necessary.
You can find the manual, firmware, and the parameterization software via the
download area in the Internet under:
http://www.siemens.com/powerquality
http://www.siprotec.com
⇒ Accessories (7XV567x)
Disclaimer of Liability
Although we have carefully checked the contents of this publication for conformity with
the hardware and software described, we cannot guarantee complete conformity since
errors cannot be excluded.
The information provided in this document is checked at regular intervals and any correc-
tions that might become necessary are included in the next releases. Any suggestions for
improvement are welcome.
Subject to change without prior notice.
Copyright
Copyright © Siemens AG 2022 – All Rights Reserved
The reproduction, transmission or use of this document or its contents is not permitted
without express written authority. Offenders will be liable for damages. All rights, including
rights created by patent grant or registration of a utility model or design, are reserved.
Registered Trademarks
SICAM® is a registered trademark of Siemens AG. All other product and brand names in
this manual might be trademarks, the use of which by third persons for their purposes
might infringe the rights of their respective owners.
OpenSSL
This product includes software developed by the OpenSSL Project for use in OpenSSL
Toolkit (http://www.openssl.org/).
This product includes software written by Tim Hudson (tjh@cryptsoft.com).
This product includes cryptographic software written by Eric Young
(eay@cryptsoft.com).
Notes on Safety
This document contains notes that must be adhered to for your own personal safety and
to avoid damage to property. However, it does not constitute a complete description of all
safety measures required for installation, service, and maintenance of the equipment
(module, device) in question. Details are to be taken from the device manual and those
are mandatory.
WARNING
Danger of severe personal injury or substantial damage to property
Hazardous voltages may occur in devices and modules during operation
depending on the design and application.
Always observe the instructions given in "Qualified Electrical Engi-
neering Personnel" below.
Qualified Electrical Engineering Personnel
Qualified electrical engineering personnel in the sense of this document are people who
can demonstrate technical qualifications as electrical technicians. These persons may
commission, isolate, ground and label devices, systems and circuits according to the
standards of safety engineering.
Frei verwendbar - Product Information
E50417-B1050-C541-A7, Edition 03.2022
(7KG775, 7KG85xx, 7KG95xx, 7KG966x)
7KG775x, 7KG85xx, 7KG95xx, 7KG966x, 7XV567x
Use as Prescribed
The equipment (device, module) may only be used for such applications as set out in the
catalogs and the technical description, and only in combination with third-party equipment
recommended and approved by Siemens.
If the device is not used in accordance with this product information, the scheduled
protection is impaired.
Correct and safe operation of the product requires adequate transportation, storage,
installation, and assembly, appropriate use, and maintenance as well as the attention of
the WARNINGs.
During the operation of electric equipment, it is unavoidable that certain parts of this
equipment will carry hazardous voltages. Severe injury or material damage can occur if
the appropriate measures are not taken.
The limiting values indicated in the product information and the manuals must not be
exceeded; this also refers to testing and commissioning.
Further Support
For any questions concerning your system, please contact your Siemens representative.
The Siemens Customer Support Center provides around-the-clock support.
Phone: +49 911 2155 4466
Internet:
http://www.siemens.com/powerquality
(7KG775, 7KG85xx, 7KG95xx, 7KG966x)
http://www.siprotec.com
(7XV567x)
E-Mail: energy.automation@siemens.com
Statement of Conformity
Low-voltage Directive 2014/35/EU
EMC Council Directive 2014/30/EU
This conformity has been established by means of tests conducted by
Siemens AG according to the Council Directive in agreement with the
generic standard EN 61000-6-5 for the EMC directives, and with the
product standard EN 62586-1
Further Standards
This product is UL-certified, based on the technical data (except for 7KG775x):
- acc. to Standard UL 508; UL File No.: E194016 (only for 7XV5673)
- acc. to Standard UL 61010-1, third edition; UL File No.: E228586
IND. CONT. EQ.
69CA
Used Symbols
No.
Symbol
1
Direct current: IEC 60417-5031
2
Alternating current: IEC 60417-5032
3
Direct and alternating current: IEC 60417-5033
4
3-phase alternating current
5
Earth (ground) terminal: IEC 60417-5017
6
Protective conductor terminal: IEC 60417-5019
7
Caution, risk of electric shock
8
Caution, risk of danger: ISO 7000-0434
SICAM Devices
⇒ Accessories
Open-type Measuring Equipment
2UD1
Description
7

Advertisement

loading