Philips FLAVORS 22PFL6403D/12 User Manual
Philips FLAVORS 22PFL6403D/12 User Manual

Philips FLAVORS 22PFL6403D/12 User Manual

Hide thumbs Also See for FLAVORS 22PFL6403D/12:

Advertisement

Quick Links

22PFL6403D/12
32PFL6403D/12
42PFL6403D/12
Register your product and get suppor t at
www.philips.com/flavors
EN
User Manual
IT
Manuale D'uso

Advertisement

Table of Contents
loading

Summary of Contents for Philips FLAVORS 22PFL6403D/12

  • Page 1 22PFL6403D/12 32PFL6403D/12 42PFL6403D/12 Register your product and get suppor t at www.philips.com/flavors User Manual Manuale D’uso...
  • Page 2 Model Serial www.philips.com/support Österreich 0810 000205 €0.07 pro Minute België/Belgique 078250145 €0.06 Per minuut/Par minute България +3592 489 99 96 Местен разговор Hrvatska 01 3033 754 Lokalni poziv Česká republika 800142840 Bezplatný hovor Danmark 3525 8759 Lokalt opkald Suomi 09 2311 3415...
  • Page 3: Table Of Contents

    7 Connect devices Bottom connectors Side connectors Connect a computer 1 Notice Use a Conditional Access Module Assign devices Use Philips EasyLink 2 Important Connect a Kensington lock 3 Your Flavors TV 8 Product information TV overview Supported display resolutions...
  • Page 4: Notice

    Philips is committed to develop, produce and market products that cause no adverse health effects. Philips confi rms that if its products are handled properly for their intended use, they are safe to use according to scientifi c evidence available today.
  • Page 5 the mains fuse, this must be replaced with a All other registered and unregistered fuse of the same value as indicated on the plug trademarks are the property of their respective (example 10A). owners. Remove fuse cover and fuse. The replacement fuse must comply with BS 1362 and have the ASTA approval mark.
  • Page 6: Important

    TV, disconnect the TV from improper wall mounting that results in the power outlet immediately. Contact accident or injury. Philips Customer Support to have the • Risk of overheating! Never install the TV TV checked before use.
  • Page 7 Screen care • Your product contains batteries covered by the European Directive 2006/66/EC, • Avoid stationary images as much as which cannot be disposed of with normal possible. Stationary images are images that household waste. remain on-screen for extended periods of •...
  • Page 8: Your Flavors Tv

    Never mix old and new batteries or carbon and Congratulations on your purchase, and alkaline batteries. Replace the batteries with the correct welcome to Philips! To fully benefi t from the type and size when they are exhausted. • Remove the batteries if the remote control is not used support that Philips offers, register your product for an extended period of time.
  • Page 9 Standby f INFO • Switches the TV to standby if the TV is on. Displays programme information, if available. g OK • Switches the TV on if the TV is in standby. b SOURCE Activates a selection or accesses the [All channels] menu.
  • Page 10: Use Your Flavors Tv

    4 Use your Switch channels Flavors TV This section helps you perform basic Flavors TV operations. Switch the TV on, off or to standby To switch on • If the indicator is off, press POWER at the side of the TV. Standby •...
  • Page 11: Adjust Tv Volume

    Adjust TV volume Note • For UK users only: Some digital TV channels offer dedicated digital text services (for example, BBC1). • Press Mute • Press to mute audio. VOLUME +/- • Press at the side of the TV. Use teletext Press TELETEXT The main index page appears.
  • Page 12: Use More Of Your Flavors Tv

    5 Use more of [Themes] • Select to change the appearance of your Flavors TV TV menus. [USB] • Select to view photos, play music or apply menu themes stored on a USB Access TV menus storage device. Press OK to display the menu of the Menus help you to install your TV, adjust picture selected option.
  • Page 13: Apply Menu Themes

    This can damage fi les on the USB storage device. Connect the USB storage device to your computer. Navigate to www.philips.com/fl avors and download new themes to the USB storage device. Press to select a theme to apply.
  • Page 14: Adjust Picture And Sound Settings

    Adjust picture and sound The [Themes] menu appears, » displaying themes stored on the TV settings and USB storage device. This section describes how to adjust picture and sound settings. Use settings assistant Use [Settings assistant] to guide you through the best picture and sound settings.
  • Page 15 [Contrast] Adjusts the intensity • to enter the [Reset smart Press of bright areas, keeping dark areas settings] menu. unchanged. Navigation buttons to Press the • [Brightness] Adjusts the intensity and select: details of dark areas. [Current] Applies current picture and •...
  • Page 16: Use Advanced Teletext Features

    Adjust sound settings Note Press MENU . • To enable or disable the volume bar that appears when Select [TV menu] > [TV Settings] > you adjust the volume, press MENU . Select [TV menu] [Sound] . > [Installation] > [Preferences] > [Volume bar] . Press to enter the [Sound] menu: [Audio language] Available for digital...
  • Page 17 Select teletext subpages Press OK to search for pages that contain the word or number. A teletext page can hold several subpages. Press until no word or number is Subpages are displayed on a bar next to the highlighted to exit [Search] . main page number.
  • Page 18: Create And Use Lists Of Favorite Channels

    • [Cycle subpages] Cycles through Select [On] or [Off] . subpages automatically if subpages are Press OK to change the option. available. • [Language] Switches to a different language group to display a language Create and use lists of correctly when that language uses a favorite channels different character set.
  • Page 19: Use The Electronic Program Guide

    • Set reminders when programmes start Press the Red button to show all favorite • Setup preferred EPG channels lists. Press to select a list. Switch on EPG Press OK . Press the Green button to enter [Edit list] Note mode.
  • Page 20: Use Timers

    Automatically switch the TV to [Watch] Switches to the current • programme. standby (Sleeptimer) [Jump to...] Jumps to the next or • Sleeptimer switches the TV to standby after a previous day. delay. You can always switch off your TV earlier •...
  • Page 21: Use Child Control And Rating Locks

    Use child control and rating Press to select the channel or locks device you want to lock or unlock. At each selection, press OK to lock or unlock the channel or device. You can prevent your children from watching certain programmes or certain channels by locking the TV controls and by using ratings.
  • Page 22: Use Subtitles

    Use subtitles Select a subtitle language on digital TV channels You can enable subtitles for each TV channel. Note Subtitles are broadcast via teletext or DVB- T digital broadcasts. With digital broadcasts, • When you select a subtitle language on a digital TV you have the additional option of selecting a channel as described below, the preferred subtitle preferred subtitle language.
  • Page 23: View Photos And Play Music From A Usb Storage Device

    [USB] menu. Press Caution » [Picture] is highlighted. • Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss Picture of data from the device. Picture Afrika_2001 Your TV is fi...
  • Page 24: Listen To Digital Radio Channels

    Listen to music Press OK to view the picture or to start a slide show. After connecting your USB storage device Press OK to pause the slide show and to the TV, press to enter the [USB] press OK again to restart. menu.
  • Page 25: Update The Tv Software

    Update the TV software Select [TV menu] > [Installation] > [Preferences] > [Location] . Philips continuously tries to improve its to enter the [Location] menu. Press products and we recommend that you update to select the TV mode: the TV software when updates are available.
  • Page 26: Install Channels

    6 Install channels Press to return to the [Installation] menu. Step 2 Select your country The fi rst time you setup your TV, you are prompted to select a menu language and to Select the country where you are located. The install TV and digital radio channels (if available).
  • Page 27: Manually Install Channels

    to enter the [Channel installation] to enter the [Channel installation] Press Press menu. menu. » [Automatic installation] is highlighted. » [System] is highlighted. Press to select [Start now] . Press to enter the [System] list. Press OK . Press to select your country or region.
  • Page 28: Rename Channels

    Select [Store current channel] to store Press the Green button to uninstall or the fi ne-tuned channel under the current reinstall the channel. channel number. Press MENU to exit. Press to enter. Press OK . Rearrange channels » [Done] appears. Press MENU to exit.
  • Page 29: Test Digital Reception

    When the update is complete, press the Red button to return to the [Channel installation] menu. Press MENU to exit. Test digital reception If using digital broadcasts, you can check the quality and signal strength of digital channels. This allows you to reposition and test your aerial or satellite dish.
  • Page 30: Connect Devices

    7 Connect devices For best picture quality, we recommend you use the following connection types, listed below from highest to basic quality: HDMI Y Pb Pr (component) SCART VIDEO (composite) Note • The connectivity diagrams provided in this section are examples only.
  • Page 31 HDMI : Y Pb Pr ( EXT 3 ) and AUDIO IN L/R : Y Pb Pr inputs video from component devices Input video/audio from HDMI devices such as Blu-ray players. such as DVD players, digital receivers and game consoles. AUDIO IN L/R inputs analog audio from Y Pb Pr component devices.
  • Page 32: Side Connectors

    Side connectors SPDIF OUT (Optical) : Output TV audio to home theatres and other digital audio systems. 32/42” 22” SPDIF OUT TV ANTENNA : Input signals from aerials. ANTENNA VIDEO and AUDIO L/R : Note • VIDEO and AUDIO L/R are side connectors on 32/42” models only.
  • Page 33: Connect A Computer

    • DVI-HDMI cable AUDIO AUDIO COMMON INTERFACE : Slot for a Conditional Access Module (CAM) (see ‘Use a Conditional Access Module’ on page 31 ) . HDMI cable and HDMI-DVI adaptor • AUDIO AUDIO Connect a computer Before connecting a computer to the TV •...
  • Page 34: Assign Devices

    Insert and activate a CAM Press MENU . Select [TV menu] > [Installation] > Caution [Connections] . The [Connections] list appears. » • Be sure to follow the instructions described below. Wrong insertion of a CAM may damage both the CAM and your TV.
  • Page 35: Use Philips Easylink

    Use Philips EasyLink Connect a Kensington lock Your TV supports Philips EasyLink, which There is a Kensington security slot under the enables one-touch play and one-touch standby TV. Prevent theft by looping a Kensington lock between EasyLink-compliant devices. between the slot and a permanent object, such as a heavy table.
  • Page 36 Connections EXT 1 EXT 1 None EXT 2 Blu-ray EXT 3 HDMI 1 HDD/DVDR HDMI 2 HD rec. Game HDMI Side Side Push the CAM in as far as it will go. Press to enter the list. Turn on the TV and wait for the CAM to Press to select a connector.
  • Page 37 Use Philips EasyLink Connect a Kensington lock Your TV supports Philips EasyLink, which There is a Kensington security slot under the enables one-touch play and one-touch standby TV. Prevent theft by looping a Kensington lock between EasyLink-compliant devices. between the slot and a permanent object, such as a heavy table.
  • Page 38: Product Information

    Playback formats: MP3, Linear PCM, slide show (.alb), JPEG Product information is subject to change without notice. For detailed product Remote control information, go to www.philips.com/fl avors. • Type: RCPF06E08W Supported display resolutions • Batteries: 2 x AAA (LR03 type)
  • Page 39: Troubleshooting

    Loud speakers, unearthed audio devices, the TV. If the blinking occurs again, contact neon lights, high buildings or mountains can Philips Customer Support. infl uence the picture quality. Try to improve You forgot your code to unlock the child lock...
  • Page 40: Sound Issues

    The TV did not save my settings: mount] setting should be used for TVs • [Home] mode, Verify that the TV is set to mounted on walls. [Equalizer] settings are suitable for which offers you complete fl exibility to • change settings.
  • Page 41: Computer Connection Issues

    Contact us If you cannot resolve your problem, refer to the FAQs for this TV at www.philips.com/fl avors. If the problem remains unresolved, contact Philips Customer Support in your country as listed in this User Manual.
  • Page 42: Index

    10 Index technical specifi cations Conditional Access Module access insert Connections assign Active Control bottom Analogue channel side fi ne tune Contrast Audio language Audio position Auto surround Auto volume levelling Delta volume Demo Digital channel subtitle language Brightness test reception troubleshooting Digital radio Channel decoder...
  • Page 43 SPDIF One-touch standby bottom Standby Subtitles Parental control language child lock on analogue channel parental ratings on digital channel Philips EasyLink Surround mode disable enable one-touch play Teletext one-touch standby digital text services Picture format dual screen change 13 , 6...
  • Page 44 Timer on timer sleep timer Tint Transmission troubleshooting Troubleshooting adjust volume as computer monitor connections controls location menu remote control safety screen care software standby switch channels switch off switch on troubleshooting connection listen to music view photos Video format display resolutions Volume adjust...
  • Page 45 © 2008 Koninklijke Philips Electronics N.V. All rights reserved. Document order number: 3139 125 40722...

This manual is also suitable for:

Flavors 32pfl6403d/12Flavors 42pfl6403d/12

Table of Contents