HIKVISION DS-K1TA70 Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Touch terminals
  5. DS-K1TA70 Series
  6. User manual

HIKVISION DS-K1TA70 Series User Manual

Face recognition terminal
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DS-K1TA70 Series Face Recognition Terminal
User Manual

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-K1TA70 Series

Summary of Contents for HIKVISION DS-K1TA70 Series

  • Page 1 DS-K1TA70 Series Face Recognition Terminal User Manual...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;...
  • Page 4 DS-K1TA70 Series Face Recognition Terminal User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury.
  • Page 5 DS-K1TA70 Series Face Recognition Terminal User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 6 DS-K1TA70 Series Face Recognition Terminal User Manual under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
  • Page 7 DS-K1TA70 Series Face Recognition Terminal User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death.
  • Page 8 DS-K1TA70 Series Face Recognition Terminal User Manual Cautions: Do not drop the device or subject it to physical shock, and do not expose it to high ● electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage).
  • Page 9 DS-K1TA70 Series Face Recognition Terminal User Manual Available Models Product Name Model Face Recognition Terminal DS-K1TA70MI-T Use only power supplies listed in the user instructions: Model Manufacturer Standard C2000IC12.0-24P-DE MOSO Power Supply Technology Co., Ltd. C2000IC12.0-24P-GB MOSO Power Supply Technology Co., Ltd.

  • Page 10: Table Of Contents

    DS-K1TA70 Series Face Recognition Terminal User Manual Contents Chapter 1 Overview ........................1 1.1 Overview ..........................1 1.2 Features ..........................1 Chapter 2 Appearance ........................ 3 Chapter 3 Installation ......................... 6 3.1 Installation Environment ......................6 3.2 Flush Mounting ........................6 3.3 Surface Mounting ........................
  • Page 11 DS-K1TA70 Series Face Recognition Terminal User Manual 7.1 Login ............................ 33 7.1.1 Login by Administrator ....................33 7.1.2 Login by Activation Password ..................36 7.2 Communication Settings ...................... 37 7.2.1 Set Wired Network Parameters .................. 38 7.2.2 Set RS-485 Parameters ....................39 7.2.3 Set Wiegand Parameters .....................
  • Page 12 DS-K1TA70 Series Face Recognition Terminal User Manual 7.9.4 Set Manual and Auto Attendance via Device .............. 59 7.10 System Maintenance ......................60 7.11 Video Intercom ........................62 7.11.1 Call Client Software from Device ................62 7.11.2 Call Center from Device .................... 63 7.11.3 Call Device from Client Software ................
  • Page 13 DS-K1TA70 Series Face Recognition Terminal User Manual 8.5.14 Customize Audio Content ..................82 8.5.15 Set Image Parameters ....................83 8.5.16 Set Supplement Light Brightness ................85 8.5.17 Time and Attendance Settings .................. 85 8.5.18 Set Video Intercom Parameters ................88 8.5.19 Access Control Settings .....................
  • Page 14 DS-K1TA70 Series Face Recognition Terminal User Manual 9.4.9 Configure Resident Information ................124 9.4.10 Configure Additional Information ................124 9.4.11 Import and Export Person Identify Information ............125 9.4.12 Import Person Information ..................125 9.4.13 Import Person Pictures ................... 125 9.4.14 Export Person Information ..................
  • Page 15 DS-K1TA70 Series Face Recognition Terminal User Manual 9.8.3 Configure Device Actions for Card Swiping ............... 156 9.8.4 Configure Device Actions for Person ID ..............158 9.9 Door Control ........................159 9.9.1 Control Door Status ....................159 9.9.2 Check Real-Time Access Records ................160 9.10 Event Center ........................
  • Page 16 DS-K1TA70 Series Face Recognition Terminal User Manual 9.14.2 Change Device Password ..................196 9.14.3 Time Management ....................196 9.14.4 System Maintenance ....................197 9.14.5 Configure RS-485 Parameters ................. 198 9.14.6 Security Mode Settings ................... 199 9.14.7 Network Parameters Settings ................. 199 9.14.8 Report Strategy Settings ..................

  • Page 17: Chapter 1 Overview

    DS-K1TA70 Series Face Recognition Terminal User Manual Chapter 1 Overview 1.1 Overview Face recognition terminal is a kind of access control device for face recognition, which is mainly applied in security access control systems, such as logistic centers, airports, university campuses, alarm centrals, dwellings, etc.
  • Page 18 DS-K1TA70 Series Face Recognition Terminal User Manual Connects to secure door control unit via RS-485 protocol to avoid the door opening when the ● terminal is destroyed Imports and export data to the device from the client software ● Supports simple theme ●...

  • Page 19: Chapter 2 Appearance

    DS-K1TA70 Series Face Recognition Terminal User Manual Chapter 2 Appearance Refer to the following contents for detailed information of the face recognition terminal:...
  • Page 20 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 2-1 Face Recognition Terminal Diagram...
  • Page 21 DS-K1TA70 Series Face Recognition Terminal User Manual Table 2-1 Description of Face Recognition Terminal Name USB Interface Card Swiping Area Touch Screen Camera IR Light White Light Thermographic Module IR Light Camera TAMPER Thermographic Module Interface Debugging Port Power Interface...

  • Page 22: Chapter 3 Installation

    DS-K1TA70 Series Face Recognition Terminal User Manual Chapter 3 Installation 3.1 Installation Environment Avoid backlight, direct sunlight, and indirect sunlight. ● For better face recognition, there should be light source in or near the installation environment. ● Sunlight, wind, hot/cool air from air conditioner and other external factors, which may affect ●...
  • Page 23 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 3-1 Connect Thermographic Module 3. Use 5 supplied screws (4_KA4×22-SUS) to secure the mounting plate on the gang box. 4. Route the cable through the cable hole of the mounting plate, and connect to corresponding external devices' cables.
  • Page 24 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 3-2 Install Device 6. Use 2 supplied screws (SC-M4×14.5TP10-SUS) to secure the device and the mounting plate. Note When the screw's head is beneath the device surface, the device is secured.

  • Page 25: Surface Mounting

    DS-K1TA70 Series Face Recognition Terminal User Manual Figure 3-3 Secure Device Note The installation height here is the recommended height. You can change it according to your ● actual needs. For easy installation, drill holes on mounting surface according to the supplied mounting ●...
  • Page 26 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 3-4 Mounting Template 2. Drill 5 holes on the wall or other surface according to the mounting template. 3. Insert the screw sockets of the setscrews in the drilled holes. Figure 3-5 Insert Screw Socket...
  • Page 27 DS-K1TA70 Series Face Recognition Terminal User Manual 5. Route the cable through the cable hole of the mounting plate, and connect to corresponding external devices' cables. 6. Align the device with the mounting plate and hang the device on the mounting plate.
  • Page 28 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 3-7 Secure Device Note The installation height here is the recommended height. You can change it according to your ● actual needs. For easy installation, drill holes on mounting surface according to the supplied mounting ●...

  • Page 29: Chapter 4 Wiring

    DS-K1TA70 Series Face Recognition Terminal User Manual Chapter 4 Wiring You can connect the RS-485 terminal with the RS-485 card reader, connect the NC and COM terminal with the door lock, connect the SENSOR terminal with the door contact, the BTN/GND...
  • Page 30 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 4-1 Terminal Diagram The descriptions of the terminals are as follows:...
  • Page 31 DS-K1TA70 Series Face Recognition Terminal User Manual Table 4-1 Terminal Descriptions Group Function Color Name Description Group A Power Input +12 V 12 VDC Power Supply Black Ground Group B Alarm Input Yellow/Blue Alarm Input 1 Yellow/Black Ground Yellow/Orange IN2...

  • Page 32: Wire Normal Device

    DS-K1TA70 Series Face Recognition Terminal User Manual Group Function Color Name Description Yellow/Green SENSOR Door Contact Yellow/Gray Exit Door Wiring 4.2 Wire Normal Device You can connect the terminal with normal peripherals. The wiring diagram without secure door control unit is as follows.

  • Page 33: Wire Secure Door Control Unit

    DS-K1TA70 Series Face Recognition Terminal User Manual The suggested power cable's diameter: 22 AWG. The suggested other cable's diameter: 26 AWG. ● Do not wire the device to the electric supply directly. ● Warning The face recognition terminal shall adapt an external listed Class 2 power supply with surge protected function.
  • Page 34 DS-K1TA70 Series Face Recognition Terminal User Manual Type 1 Note The fire system controls the power supply of the access control system. Figure 4-4 Wire Device Figure 4-5 Wire Secure Door Control Unit...
  • Page 35 DS-K1TA70 Series Face Recognition Terminal User Manual Type 2 Note The fire system (NO and COM, normally open when powering off) is connected with the lock and the power supply in series. When an fire alarm is triggered, the door remains open. In normal times, NO and COM are closed.

  • Page 36: Wiring Diagram Of Door Locked When Powering Off

    DS-K1TA70 Series Face Recognition Terminal User Manual Figure 4-7 Wiring Secure Door Control Unit 4.4.2 Wiring Diagram of Door Locked When Powering Off Lock Type: Cathode Lock, Electric Lock, and Electric Bolt (NC) Security Type: Door Locked When Powering Off...
  • Page 37 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 4-8 Device Wiring Figure 4-9 Wiring Diagram...

  • Page 38: Chapter 5 Activation

    DS-K1TA70 Series Face Recognition Terminal User Manual Chapter 5 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported.
  • Page 39 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 5-1 Activation Page Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least...

  • Page 40: Activate Via Sadp

    Get the SADP software from the supplied disk or the official website http:// ● www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet.

  • Page 41: Activate Device Via Client Software

    DS-K1TA70 Series Face Recognition Terminal User Manual Note Characters containing admin and nimda are not supported to be set as activation password. 4. Click Activate to start activation. Status of the device becomes Active after successful activation. 5. Modify IP address of the device.

  • Page 42: Activate Via Web Browser

    DS-K1TA70 Series Face Recognition Terminal User Manual 5. Click Activate to open the Activation dialog. 6. Create a password in the password field, and confirm the password. Caution The password strength of the device can be automatically checked. We highly recommend you...

  • Page 43: Chapter 6 Quick Operation

    DS-K1TA70 Series Face Recognition Terminal User Manual Chapter 6 Quick Operation 6.1 Select Language You can select a language for the device system. After the device activation, you can select a language for the device system.
  • Page 44 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 6-1 Select System Language By default, the system language is English. Note After you change the system language, the device will reboot automatically.

  • Page 45: Set Application Mode

    DS-K1TA70 Series Face Recognition Terminal User Manual 6.2 Set Application Mode After activating the device, you should select an application mode for better device application. Steps 1. On the Welcome page, select Indoor or Others from the drop-down list. Figure 6-2 Welcome Page...

  • Page 46: Set Network Parameters

    DS-K1TA70 Series Face Recognition Terminal User Manual Note You can also change the settings in System Settings. ● If you install the device indoors near the window or the face recognition function is not ● working well, select Others. If you do not configure the application mode and tap Next, the system will select Indoor by ●...
  • Page 47 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 6-4 Add Administrator Page 3. Select a credential to add. Note Up to one credential should be added. : Face forward at the camera. Make sure the face is in the face recognition area. Click capture and click to confirm.
  • Page 48 DS-K1TA70 Series Face Recognition Terminal User Manual : Enter the card No. or present card on the card presenting area. Click OK. 4. Click OK. You will enter the authentication page. Status Icon Description Device is armed/not armed. Hik-Connect is enabled/disabled.

  • Page 49: Chapter 7 Basic Operation

    DS-K1TA70 Series Face Recognition Terminal User Manual Chapter 7 Basic Operation 7.1 Login Login the device to set the device basic parameters. 7.1.1 Login by Administrator If you have added an administrator for the device, only the administrator can login the device for device operation.
  • Page 50 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 7-1 Admin Login 2. Authenticate the administrator's face or card to enter the home page.
  • Page 51 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 7-2 Home Page Note The device will be locked for 30 minutes after 5 failed attempts. 3. Optional: Tap and you can enter the device activation password for login. 4. Optional: Tap...

  • Page 52: Login By Activation Password

    DS-K1TA70 Series Face Recognition Terminal User Manual 7.1.2 Login by Activation Password You should login the system before other device operations. If you do not configure an administrator, you should follow the instructions below to login. Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture to enter password entering page.

  • Page 53: Communication Settings

    DS-K1TA70 Series Face Recognition Terminal User Manual Figure 7-3 Home Page 7.2 Communication Settings You can set the network parameters, the RS-485 parameters, and the Wiegand parameters on the communication settings page.

  • Page 54: Set Wired Network Parameters

    DS-K1TA70 Series Face Recognition Terminal User Manual 7.2.1 Set Wired Network Parameters You can set the device wired network parameters, including the IP address, the subnet mask, the gateway, and DNS parameters. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page.

  • Page 55: Set Rs-485 Parameters

    DS-K1TA70 Series Face Recognition Terminal User Manual - Disable DHCP, and you should set the IP address, subnet mask, and gateway manually. Note The device's IP address and the computer IP address should be in the same IP segment. 4. Set the DNS parameters. You can enable Auto Obtain DNS, set the preferred DNS server and the alternate DNS server.

  • Page 56: Set Wiegand Parameters

    DS-K1TA70 Series Face Recognition Terminal User Manual Note If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address according to the door No.

  • Page 57: User Management

    DS-K1TA70 Series Face Recognition Terminal User Manual 7.3 User Management On the user management interface, you can add, edit, delete and search the user. 7.3.1 Add Administrator The administrator can login the device backend and configure the device parameters. Steps 1.

  • Page 58: Add Face Picture

    DS-K1TA70 Series Face Recognition Terminal User Manual 7.3.2 Add Face Picture Add user's face picture to the device. And the user can use the face picture to authenticate. Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in the backend.
  • Page 59 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 7-7 Add Face Picture 6. Look at the camera.

  • Page 60: Add Card

    DS-K1TA70 Series Face Recognition Terminal User Manual Note Make sure your face picture is in the face picture outline when adding the face picture. ● Make sure the captured face picture is in good quality and is accurate. ● For details about the instructions of adding face pictures, see Tips When Collecting/ ●...

  • Page 61: View Password

    DS-K1TA70 Series Face Recognition Terminal User Manual 7. Configure the card No. - Enter the card No. manually. - Present the card over the card presenting area to get the card No. Note The card No. cannot be empty. ●...

  • Page 62: Set Authentication Mode

    DS-K1TA70 Series Face Recognition Terminal User Manual Note The password cannot be edited. It can only be applied by the platform. 6. Set the user role. Administrator The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission.

  • Page 63: Data Management

    DS-K1TA70 Series Face Recognition Terminal User Manual Edit User On the User Management page, select a user from the user list to enter the Edit User page. Follow the steps in User Management to edit the user parameters. Tap to save the settings.

  • Page 64: Export Data

    DS-K1TA70 Series Face Recognition Terminal User Manual The employee ID should be less than 32 characters. It can be a combination of lower letters, ● upper letters, and numbers. It should not be duplicated, and should not start with 0.

  • Page 65: Authenticate Via Multiple Credential

    DS-K1TA70 Series Face Recognition Terminal User Manual Face Face forward at the camera and start authentication via face. Card Present the card on the card presenting area and start authentication via card. Note The card can be normal IC card, or encrypted card.
  • Page 66 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 7-8 Basic Settings Page shortcut key, voice, time, language, supplement light, community No., building No., and Unit No. Shortcut Key Choose the shortcut key that displayed on the authentication page, including the call function,...
  • Page 67 DS-K1TA70 Series Face Recognition Terminal User Manual Note You can select call type from Call Room, Call Center, and Call Specified Room No. ● Call Room When you tap the call button on the authentication page, you should dial a room No. to call.

  • Page 68: Set Biometric Parameters

    DS-K1TA70 Series Face Recognition Terminal User Manual 7.7 Set Biometric Parameters You can customize the face parameters to improve the face recognition performance. The configurable parameters includes application mode, face liveness level, face recognition distance, face recognition interval, wide dynamic, face 1:N security level, face 1:1 security level, ECO settings, face with mask detection and hard hat detection.
  • Page 69 DS-K1TA70 Series Face Recognition Terminal User Manual Parameter Description When enabling the ECO mode, you can set the ECO mode's threshold. The larger the value, the easier the device entering the ECO mode. ECO Mode (1:1) Set the matching threshold when authenticating via ECO mode 1:1 matching mode.

  • Page 70: Set Access Control Parameters

    DS-K1TA70 Series Face Recognition Terminal User Manual Parameter Description If the person do not wear a face mask when authenticating, the device will not prompt a notification. 7.8 Set Access Control Parameters You can set the access control permissions, including the functions of authentication mode, enable NFC card, door contact, and door open time.

  • Page 71: Time And Attendance Status Settings

    DS-K1TA70 Series Face Recognition Terminal User Manual Parameter Description Note Biometric recognition products are not completely applicable ● to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. If you adopt multiple authentication modes, you should ●...

  • Page 72: Set Manual Attendance Via Device

    DS-K1TA70 Series Face Recognition Terminal User Manual Figure 7-10 Disable Attendance Mode Set the Attendance Mode as Disable. You will not view or configure the attendance status on the initial page. And the system will follow the attendance rule that configured on the platform.

  • Page 73: Set Auto Attendance Via Device

    DS-K1TA70 Series Face Recognition Terminal User Manual Figure 7-11 Manual Attendance Mode 3. Enable the Attendance Status Required. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required.
  • Page 74 DS-K1TA70 Series Face Recognition Terminal User Manual Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management. Steps 1. Tap T&A Status to enter the T&A Status page. 2. Set the Attendance Mode as Auto.

  • Page 75: Set Manual And Auto Attendance Via Device

    DS-K1TA70 Series Face Recognition Terminal User Manual Result When you authenticate on the initial page, the authentication will be marked as the configured attendance status according to the configured schedule. Example If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's authentication from Monday 11:00 to 12:00 will be marked as break.

  • Page 76: System Maintenance

    DS-K1TA70 Series Face Recognition Terminal User Manual Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. The name will be displayed on the T & A Status page and the authentication result page.
  • Page 77 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 7-14 Maintenance Page System Information You can view the device model, serial No., versions, address, production data, QR code, and open source code license. Note The page may vary according to different device models. Refers to the actual page for details.

  • Page 78: Video Intercom

    DS-K1TA70 Series Face Recognition Terminal User Manual Online Update If the device has been connected to Hik-Connect and network, when there is a new installation package in Hik-Connect, you can tap Device Upgrade → Online Update to upgrade the device system.

  • Page 79: Call Center From Device

    DS-K1TA70 Series Face Recognition Terminal User Manual 6. Tap Answer on the pop-up page of the client software and you can start two-way audio between the device and the client software. Note If the device is added to multiple client softwares and when the device is calling the client software, only the first client software added the device will pop up the call receiving window.

  • Page 80: Call Room From Device

    DS-K1TA70 Series Face Recognition Terminal User Manual Note For details about adding device, see Add Device. 5. Enter the Live View page and double-click the added device to start live view. Note For details about operations in the Live View page, see Live View in the user manual of the client software.

  • Page 81: Temperature Measurement Settings

    DS-K1TA70 Series Face Recognition Terminal User Manual 1) Tap on the device initial page. 2) Tap to call the mobile client. 7.12 Temperature Measurement Settings You can set the temperature measurement parameters, including temperature detection, over- temperature alarm threshold, temperature compensation, door not open when temperature is abnormal, temperature measurement mode, temperature unit, etc.
  • Page 82 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 7-15 Temperature Measurement Parameters The available parameters descriptions are as follows:...
  • Page 83 DS-K1TA70 Series Face Recognition Terminal User Manual Table 7-3 Temperature Measurement Parameters Descriptions Parameter Description Temp. Detection When enabling the function, the device will authenticate the permissions and at the same time take the temperature. When disabling the device, the device will authenticate the permissions only.

  • Page 84: Chapter 8 Operation Via Web Browser

    DS-K1TA70 Series Face Recognition Terminal User Manual Chapter 8 Operation via Web Browser 8.1 Login You can login via the web browser or the remote configuration of the client software. Note Make sure the device is activated. For detailed information about activation, see Activation .
  • Page 85 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 8-1 Live View Page Function Descriptions: Select the image size when starting live view. Set the volume when starting live view. Note If you adjust the volume when starting two-way audio, you may hear a repeated sounds.

  • Page 86: Person Management

    DS-K1TA70 Series Face Recognition Terminal User Manual 8.3 Person Management Click and add the person's information, including the basic information, card, authentication mode, and the picture. Click OK to save the person. Add Basic Information Click User → Add to enter the Add Person page.

  • Page 87: Search Event

    DS-K1TA70 Series Face Recognition Terminal User Manual 8.4 Search Event Click Search to enter the Search page. Figure 8-2 Search Page Enter the search conditions, including the employee ID, the name, the card No., the start time, and the end time, and click Search.

  • Page 88: View Device Information

    DS-K1TA70 Series Face Recognition Terminal User Manual Set Live View Parameters Click Configuration → Local to enter the Local page. Configure the stream type, the play performance, auto start live view, and the image format and click Save. Set Record File Size and Saving Path Click Configuration →...

  • Page 89: Set Dst

    DS-K1TA70 Series Face Recognition Terminal User Manual Time Zone Select the device located time zone from the drop-down list. Time Sync. You should set the NTP server's IP address, port No., and interval. Manual By default, the device time should be synchronized manually. You can set the device time manually or check Sync.
  • Page 90 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 8-5 Upgrade and Maintenance Page Click Reboot to start reboot the device. Restore Parameters Click Configuration → System → Maintenance → Upgrade & Maintenance . Default The device will restore to the default settings, except for the device IP address and the user information.

  • Page 91: Log Query

    DS-K1TA70 Series Face Recognition Terminal User Manual If the device has been connected to Hik-Connect and network, when there is a new installation package in Hik-Connect, you can click Upgrade after Online Update to upgrade the device system. Select an upgrade type from the drop-down list. Click and select the upgrade file from your local PC.

  • Page 92: Certificate Management

    DS-K1TA70 Series Face Recognition Terminal User Manual 8.5.9 Certificate Management It helps to manage the server/client certificates and CA certificate. Note The function is only supported by certain device models. Create and Install Self-signed Certificate Steps 1. Go to Configuration → System → Security → Certificate Management .

  • Page 93: Change Administrator's Password

    DS-K1TA70 Series Face Recognition Terminal User Manual Steps 1. Go to Configuration → System → Security → Certificate Management . 2. Create an ID in the Inport CA Certificate area. Note The input certificate ID cannot be the same as the existing ones.
  • Page 94 DS-K1TA70 Series Face Recognition Terminal User Manual Set Basic Network Parameters Click Configuration → Network → Basic Settings → TCP/IP . Figure 8-6 TCP/IP Settings Page Set the parameters and click Save to save the settings. DHCP If uncheck the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, MTU, and the device port.
  • Page 95 DS-K1TA70 Series Face Recognition Terminal User Manual Select a NIC type from the drop-down list. By default, it is Auto. DNS Server Set the preferred DNS server and the Alternate DNS server according to your actual need. Set Port Parameters Set the HTTP, RTSP, HTTPS and Server port parmaeters.
  • Page 96 DS-K1TA70 Series Face Recognition Terminal User Manual 2. Check the checkbox of Enable to enable the function. 3. Select the Platform Access Mode. Note Hik-Connect is an application for mobile devices. With the App, you can view live image of the device, receive alarm notification and so on.

  • Page 97: Set Video And Audio Parameters

    DS-K1TA70 Series Face Recognition Terminal User Manual Steps 1. Click Configuration → Network → Advanced → HTTP Listening . 2. Edit the destination IP or host name, URL and port. 3. Optional: Click Test to test whether the entered IP address or host name are valid.

  • Page 98: Customize Audio Content

    DS-K1TA70 Series Face Recognition Terminal User Manual Set Audio Parameters Click Configuration → Video/Audio → Audio . Set the audio stream type and audio encoding. You can also drag the block to adjust the device input and output volume. Click Save to save the settings after the configuration.

  • Page 99: Set Image Parameters

    DS-K1TA70 Series Face Recognition Terminal User Manual 1) Click Add. 2) Set the time duration and the language. Note If authentication is succeeded in the configured time duration, the device will broadcast the configured content. 3) Enter the audio content.
  • Page 100 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 8-9 Image Settings Page 2. Configure the parameters to adjust the image. Video Standard Set the video frame rate when performing live view remotely. After changing the standard, you should reboot the device to take effect.

  • Page 101: Set Supplement Light Brightness

    DS-K1TA70 Series Face Recognition Terminal User Manual 8.5.16 Set Supplement Light Brightness Set the device supplement light brightness. Steps 1. Click Configuration → Image → Supplement Light Parameters . Figure 8-10 Supplement Light Settings Page 2. Select a supplement light type and mode from the drop-down list. If you select the mode as ON, you should set the brightness.
  • Page 102 DS-K1TA70 Series Face Recognition Terminal User Manual Disable Attendance Mode via Web Disable the attendance mode and the system will not display the attendance status on the initial page. Steps 1. Click Configuration → Attendance to enter the settings page.
  • Page 103 DS-K1TA70 Series Face Recognition Terminal User Manual Result You should select an attendance status manually after authentication. Note If you do not select a status, the authentication will be failed and it will not be marked as a valid attendance.

  • Page 104: Set Video Intercom Parameters

    DS-K1TA70 Series Face Recognition Terminal User Manual 5. Optional: Select an status and change its name if required. 6. Set the status' schedule. Refers to Time Settings for details. Result On the initial page and authenticate. The authentication will be marked as the configured attendance status according to the schedule.
  • Page 105 DS-K1TA70 Series Face Recognition Terminal User Manual Device Type The device can be used as a door station or outer door station. Select a device type from the drop-down list. Note If you change the device type, you should reboot the device.

  • Page 106: Access Control Settings

    DS-K1TA70 Series Face Recognition Terminal User Manual 8.5.19 Access Control Settings Set Authentication Parameters Click Configuration → Access Control → Authentication Settings . Note The functions vary according to different models. Refers to the actual device for details. Click Save to save the settings after the configuration.
  • Page 107 DS-K1TA70 Series Face Recognition Terminal User Manual The read card No. will be in reverse sequence after enabling the function. If select Sub Card Reader: Card Reader Type/Card Reader Description Get card reader type and description. They are read-only. Enable Card Reader Enable the card reader's function.
  • Page 108 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 8-12 Door Parameters Settings Page Click Save to save the settings after the configuration. Door No. Select the device corresponded door No. Name You can create a name for the door. Open Duration Set the door unlocking duration.
  • Page 109 DS-K1TA70 Series Face Recognition Terminal User Manual You can set the door lock status when the door lock is powering off. By default, it is Remain Closed. Extended Open Duration The door contact can be enabled with appropriate delay after person with extended access needs swipes her/his card.
  • Page 110 DS-K1TA70 Series Face Recognition Terminal User Manual Configure SIP Parameters Set the device's IP address and the SIP server's IP address. After setting the parameters, you can communicate among the access control device, door station, indoor station, main station, and the platform.
  • Page 111 DS-K1TA70 Series Face Recognition Terminal User Manual Set Wiegand Parameters You can set the Wiegand transmission direction. Steps Note Some device models do not support this function. Refer to the actual products when configuration. 1. Click Configuration → Access Control → Wiegand Settings .
  • Page 112 DS-K1TA70 Series Face Recognition Terminal User Manual Note If you change the peripheral, and after you save the device parameters, the device will reboot automatically. Set Privacy Parameters Set the event storage type, picture upload and storage parameters, and the picture clearing parameters.

  • Page 113: Set Biometric Parameters

    DS-K1TA70 Series Face Recognition Terminal User Manual If you enable this function, you can save the picture captured by linked camera to the device. Clear All Pictures in Device Note All pictures cannot be restored once they are deleted. Clear Registered Face Pictures All registered pictures in the device will be deleted.
  • Page 114 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 8-14 Smart Settings Page Click Save to save the settings after the configuration. Face Anti-spoofing Enable or disable the live face detection function. If enabling the function, the device can recognize whether the person is a live one or not.
  • Page 115 DS-K1TA70 Series Face Recognition Terminal User Manual After enabling the face anti-spoofing function, you can set the matching security level when performing live face authentication. Recognition Distance Select the distance between the authenticating user and the device camera. Application Mode Select either others or indoor according to actual environment.

  • Page 116: Set Notice Publication

    DS-K1TA70 Series Face Recognition Terminal User Manual ECO Mode (1:N) Set the matching threshold when authenticating via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate Face with Mask Detection After enabling the face with mask detection, the system will recognize the captured face with mask picture.

  • Page 117: Temperature Measurement Settings

    DS-K1TA70 Series Face Recognition Terminal User Manual Figure 8-15 Theme Page Display Mode You can select display theme for device authentication. You can select Display Mode as Simple or Normal. When you select Simple, the information of name, ID, face picture will be not displayed.
  • Page 118 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 8-16 Temperature Measurement Settings 2. Enable Temperature Measurement. 3. Configure the temperature measurement parameters. Enable Temperature Detection When enabling the function, the device will authenticate the permissions and at the same time take the temperature. When disabling the device, the device will authenticate the permissions only.
  • Page 119 DS-K1TA70 Series Face Recognition Terminal User Manual When enabling the function, the device will not authenticate the permissions, but only take the temperature. When disabling the function, the device will authenticate the permissions and at the same time take the temperature.

  • Page 120: Chapter 9 Client Software Configuration

    DS-K1TA70 Series Face Recognition Terminal User Manual Chapter 9 Client Software Configuration 9.1 Configuration Flow of Client Software Follow the flow diagram below to configure on the client software. Figure 9-1 Flow Diagram of Configuration on Client Software 9.2 Device Management...

  • Page 121: Add Device

    DS-K1TA70 Series Face Recognition Terminal User Manual Example You can control entrance & exit and manage attendance after adding access control devices to the client; you can perform video intercom with the indoor stations and door stations. 9.2.1 Add Device The client provides three device adding modes including by IP/domain, IP segment, and ISUP protocol.
  • Page 122 DS-K1TA70 Series Face Recognition Terminal User Manual 3. In the Online Device area, check one or more online device(s), and click Add to open the device adding window. Figure 9-3 Add Single Online Device Figure 9-4 Add Multiple Online Devices...
  • Page 123 DS-K1TA70 Series Face Recognition Terminal User Manual Name Enter a descriptive name for the device. IP Address Enter the device's IP address. The IP address of the device is obtained automatically in this adding mode. Port You can customize the port number. The port number of the device is obtained automatically in this adding mode.
  • Page 124 DS-K1TA70 Series Face Recognition Terminal User Manual Add Multiple Detected Online Devices For detected online devices sharing the same user name and password, you can add them to the client in a batch. Before You Start Make sure the to-be-added devices are online.
  • Page 125 DS-K1TA70 Series Face Recognition Terminal User Manual 9. Click Add to add the devices. Add Device by IP Address or Domain Name If you know the IP address or domain name of the device to add, you can add devices to the client by specifying the IP address (or domain name), user name, password, etc.
  • Page 126 DS-K1TA70 Series Face Recognition Terminal User Manual Note This function should be supported by the device. ● If you have enabled Certificate Verification, you should click Open Certificate Directory to ● open the default folder, and copy the certificate file exported from the device to this default directory to strengthen the security.
  • Page 127 DS-K1TA70 Series Face Recognition Terminal User Manual Enter the device password. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 128 DS-K1TA70 Series Face Recognition Terminal User Manual Device Account Enter the account name registered on ISUP protocol. ISUP Key For ISUP 5.0 devices, enter the ISUP key if you have set it when configuring network center parameter for the device.

  • Page 129: Reset Device Password

    DS-K1TA70 Series Face Recognition Terminal User Manual Adding Mode Enter 0 or 1 or 2. Address Edit the address of the device. Port Enter the device port number. The default port number is 8000. User Name Enter the device user name. By default, the user name is admin.

  • Page 130: Group Management

    DS-K1TA70 Series Face Recognition Terminal User Manual Note For the following operations for resetting the password, contact our technical support. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 131: Import Resources To Group

    DS-K1TA70 Series Face Recognition Terminal User Manual 9.3.2 Import Resources to Group You can import the device resources (such as alarm inputs/outputs, access points, etc.) to the added group in a batch. Before You Start Add a group for managing devices. Refer to Add Group .

  • Page 132: Person Management

    DS-K1TA70 Series Face Recognition Terminal User Manual Steps 1. Enter the Device Management module. 2. Click Device Management → Group to enter the group management page. All the added groups are displayed on the left. 3. Click a group to show the resources added to this group.

  • Page 133: Configure Basic Information

    DS-K1TA70 Series Face Recognition Terminal User Manual 9.4.2 Configure Basic Information You can add person to the client one by one and configure the person's basic information such as name, email, phone number, etc. Steps 1. Enter Person module. Note For the first time you enter Person module, a window pops up, and you can set the rules to generate person ID (letters and numbers supported) when adding person.

  • Page 134: Upload A Face Photo From Local Pc

    DS-K1TA70 Series Face Recognition Terminal User Manual - Place the card on the card enrollment station or card reader and click Read to get the card number. The card number will display in the Card No. field automatically. Note You need to click Settings to set the card issuing mode and related parameters first. For details, refer to Set Card Issuing Parameters .

  • Page 135: Take A Photo Via Client

    DS-K1TA70 Series Face Recognition Terminal User Manual Note The picture should be in JPG or JPEG format and smaller than 200 KB. 6. Optional: Enable Verify by Device to check whether the facial recognition device managed in the client can recognize the face in the photo.

  • Page 136: Collect Face Via Access Control Device

    DS-K1TA70 Series Face Recognition Terminal User Manual Figure 9-5 Take a Photo via Client 7. Confirm to add the person. - Click Add to add the person and close the Add Person window. - Click Add and New to add the person and continue to add other persons.

  • Page 137: Configure Access Control Information

    DS-K1TA70 Series Face Recognition Terminal User Manual Note If you select the enrollment station, you should click Login to set related parameters of the device including IP address, port No., user name, and password. Also, you can check Face Anti- Spoofing and select the liveness level as Low, Medium, or High.
  • Page 138 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 9-6 Configure Access Control Information 4. Set a unique PIN code for the person which can be used for access authentication. - Manually enter a PIN code containing 4 to 8 digits.

  • Page 139: Customize Person Information

    DS-K1TA70 Series Face Recognition Terminal User Manual Note The valid times for visit is between 1 and 100. You can also check No Limit, then there are no limited times for the visitor to access doors/floors. Device Operator For person with device operator role, he/she is authorized to operate on the access control devices.

  • Page 140: Configure Resident Information

    DS-K1TA70 Series Face Recognition Terminal User Manual 9.4.9 Configure Resident Information If the person is resident, for video intercom purpose, you need to set the room number for her/him and bind an indoor station. After bound, you can call this person by calling the indoor station and perform video intercom with her/him.

  • Page 141: Import And Export Person Identify Information

    DS-K1TA70 Series Face Recognition Terminal User Manual 9.4.11 Import and Export Person Identify Information You can import the information and pictures of multiple persons to the client software in a batch. Meanwhile, you can also export the person information and pictures and save them in your PC.

  • Page 142: Export Person Information

    DS-K1TA70 Series Face Recognition Terminal User Manual 2. Select an added organization in the list, or click Add in the upper-left corner to add an organization and then select it. 3. Click Import to open the Import panel and check Face.

  • Page 143: Delete Registered Pictures

    DS-K1TA70 Series Face Recognition Terminal User Manual Note All persons' face pictures will be exported if you do not select any organization. 3. Click Export to open the Export panel and check Face as the content to export. 4. Click Export to start exporting.

  • Page 144: Move Persons To Another Organization

    DS-K1TA70 Series Face Recognition Terminal User Manual Note If you select the enrollment station, you should click Login, and set IP address, port No., user name and password of the device. 5. Click Import to start importing the person information to the client.

  • Page 145: Report Card Loss

    DS-K1TA70 Series Face Recognition Terminal User Manual - Place the card on the card enrollment station. - Swipe the card on the card reader. - Manually enter the card number and press the Enter key. The person(s) in the list will be issued with card(s).

  • Page 146: Configure Schedule And Template

    DS-K1TA70 Series Face Recognition Terminal User Manual Note Currently, the supported card enrollment station models include DS-K1F100-D8, DS-K1F100-M, DS-K1F100-D8E, and DS-K1F180-D8E. Card Type This field is only available when the model is DS-K1F100-D8E or DS-K1F180-D8E. Select the card type as EM card or IC card according to the actual card type.

  • Page 147: Add Template

    DS-K1TA70 Series Face Recognition Terminal User Manual Steps Note You can add up to 64 holidays in the software system. 1. Click Access Control → Schedule → Holiday to enter the Holiday page. 2. Click Add on the left panel.
  • Page 148 DS-K1TA70 Series Face Recognition Terminal User Manual 1. Click Access Control → Schedule → Template to enter the Template page. Note There are two default templates: All-Day Authorized and All-Day Denied, and they cannot be edited or deleted. All-Day Authorized The access authorization is valid in each day of the week and it has no holiday.

  • Page 149: Set Access Group To Assign Access Authorization To Persons

    DS-K1TA70 Series Face Recognition Terminal User Manual 9.6 Set Access Group to Assign Access Authorization to Persons After adding the person and configuring the person's credentials, you can create the access groups to define which person(s) can get access to which door(s) and then apply the access group to the access control device to take effect.
  • Page 150 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 9-7 Display the Selected Person(s) and Access Point(s) 8. After adding the access groups, you need to apply them to the access control device to take effect. 1) Select the access group(s) to apply to the access control device.

  • Page 151: Configure Advanced Functions

    DS-K1TA70 Series Face Recognition Terminal User Manual Note If you change the persons' access information or other related information, you will view the promptAccess Group to Be Applied on the right corner of the client. You can click the prompt to apply the changed data to the device. You can select either Apply Now or Apply Later.
  • Page 152 DS-K1TA70 Series Face Recognition Terminal User Manual Configure Parameters for Access Control Device After adding the access control device, you can configure its parameters, including overlaying user information on picture, uploading pictures after capturing, saving captured pictures, etc. Steps 1. Click Access Control → Advanced Function → Device Parameter .
  • Page 153 DS-K1TA70 Series Face Recognition Terminal User Manual If enable the function, the device can recognize the EM card. You can present EM card on the device. Note If the peripheral card reader supports presenting EM card, the function is also supported to enable/disable the EM card function.
  • Page 154 DS-K1TA70 Series Face Recognition Terminal User Manual The alarm can be triggered if the door has not been closed in a configured time period. If it is set as 0, no alarm will be triggered. Click Advanced to configure more parameters.
  • Page 155 DS-K1TA70 Series Face Recognition Terminal User Manual Minimum Card Swiping Interval If the interval between card swiping of the same card is less than the set value, the card swiping is invalid. You can set it as 0 to 255.

  • Page 156: Configure Remaining Open/Closed

    DS-K1TA70 Series Face Recognition Terminal User Manual You can select indoor or others application modes according to actual environment. Lock Authentication Failed Face After enabling the Live Face Detection function, the system will lock the user's face for 5 minutes if the live face detection is failed for more than the configured attempts. The same user cannot authenticate via the fake face within 5 minutes.
  • Page 157 DS-K1TA70 Series Face Recognition Terminal User Manual Steps 1. Click Access Control → Advanced Function → Remain Open/Closed to enter the Remain Open/ Closed page. 2. Select the door that need to be configured on the left panel. 3. To set the door status during the work day, click the Week Schedule and perform the following operations.

  • Page 158: Configure Multi-Factor Authentication

    DS-K1TA70 Series Face Recognition Terminal User Manual 6) Optional: Select the time duration(s) that need to be deleted, and then click in the Operation column to delete the selected time duration(s). 7) Optional: Click in the Operation column to clear all the time duration(s) in the time bar.
  • Page 159 DS-K1TA70 Series Face Recognition Terminal User Manual Note For setting the template, refer to Configure Schedule and Template . 3) Select the authentication type as Local Authentication, Local Authentication and Remotely Open Door, or Local Authentication and Super Password from the drop-down list.

  • Page 160: Configure Card Reader Authentication Mode And Schedule

    DS-K1TA70 Series Face Recognition Terminal User Manual Note For each access control point (door), up to four authentication groups can be added. ● For the authentication group of which authentication type is Local Authentication, up to 8 ● person/card groups can be added to the authentication group.
  • Page 161 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 9-11 Select Card Reader Authentication Mode Note PIN refers to the PIN code set to open the door. Refer to Configure Access Control Information . 2) Check the modes in the Available Mode list and they will be added to the selected modes list.

  • Page 162: Configure First Person In

    DS-K1TA70 Series Face Recognition Terminal User Manual Figure 9-12 Set Authentication Modes for Card Readers 6. Optional: Select a configured day and click Copy to Week to copy the same settings to the whole week. 7. Optional: Click Copy to to copy the settings to other card readers.

  • Page 163: Configure Anti-Passback

    DS-K1TA70 Series Face Recognition Terminal User Manual The door remains open for the configured time duration after the first person is authorized until the remain open duration ends. If you select this mode, you should set the remain open duration.

  • Page 164: Configure Device Parameters

    DS-K1TA70 Series Face Recognition Terminal User Manual 4. Click of the selected first card reader in the Card Reader Afterward column to open the select card reader dialog. 5. Select the afterward card readers for the first card reader. Note Up to four afterward card readers can be added as afterward card readers for one card reader.
  • Page 165 DS-K1TA70 Series Face Recognition Terminal User Manual The maximum transmission unit (MTU) of the network interface. 6. Click Save. Set Network Parameters After adding the access control device, you can set the device log uploading mode, and create ISUP account via wired or wireless network.
  • Page 166 DS-K1TA70 Series Face Recognition Terminal User Manual Note The port number of the wireless network and wired network should be consistent with the port number of ISUP. 8. Select the Protocol Type as ISUP. Note If set the ISUP version as 5.0, you should create an ISUP key for the ISUP account.
  • Page 167 DS-K1TA70 Series Face Recognition Terminal User Manual 5. Set the capture times once triggered which defines how many pictures will be captures for one time. 6. If the capture times is more than 1, set the interval for each capture.
  • Page 168 DS-K1TA70 Series Face Recognition Terminal User Manual Note These parameters displayed vary according to different device models. Algorithm Select Deep Learning as the face picture database. Save Authentication Picture If enabled, the captured face picture when authenticating will be saved on the device.
  • Page 169 DS-K1TA70 Series Face Recognition Terminal User Manual 3. Select an access control device in the device list and click M1 Card Encryption Verification to enter the M1 Card Encryption Verification page. 4. Set the switch to on to enable the M1 card encryption function.

  • Page 170: Configure Linkage Actions For Access Control

    DS-K1TA70 Series Face Recognition Terminal User Manual 2. On the navigation bar on the left, enter Advanced Function → More Parameters . 3. Select an access control device in the device list and click Wiegand to enter the Wiegand Settings page.

  • Page 171: Configure Device Actions For Access Event

    DS-K1TA70 Series Face Recognition Terminal User Manual The event types which the selected resource supports will display. 3. Select the event(s) and click Edit Priority to define the priority for the event(s), which can be used to filter events in the Event Center.

  • Page 172: Configure Device Actions For Card Swiping

    DS-K1TA70 Series Face Recognition Terminal User Manual Capture An event-related picture will be captured when the selected event happens. Recording An event-related picture will be captured when the selected event happens. Note The device should support recording. Buzzer on Reader The audible warning of card reader will be triggered.
  • Page 173 DS-K1TA70 Series Face Recognition Terminal User Manual Steps Note It should be supported by the device. 1. Click Access Control → Linkage Configuration . 2. Select the access control device from the list on the left. 3. Click Add to add a new linkage.

  • Page 174: Configure Device Actions For Person Id

    DS-K1TA70 Series Face Recognition Terminal User Manual 9. Optional: After adding the device linkage, you can do one or more of the followings: Delete Linkage Select the configured linkage settings in the device list and click Delete to Settings delete it.

  • Page 175: Door Control

    DS-K1TA70 Series Face Recognition Terminal User Manual Note The device should support zone function. Access Point The door status of open, close, remain open, or remain closed will be triggered. Audio Play The audio prompt will be triggered. And the select audio index related audio content will be played according to the configured play mode.

  • Page 176: Check Real-Time Access Records

    DS-K1TA70 Series Face Recognition Terminal User Manual 3. Click a door icon to select a door, or press Ctrl and select multiple doors. 4. Click the following buttons to control the door. Open Door When the door is locked, unlock it and it will be open for once. After the open duration, the door will be closed and locked again automatically.

  • Page 177: Event Center

    DS-K1TA70 Series Face Recognition Terminal User Manual 4. Optional: Click the event to view the accessed person details, including person pictures (captured picture and profile), person No., person name, organization, phone, contact address, etc. Note You can double click the captured picture to enlarge it to view the details.

  • Page 178: View Real-Time Events

    DS-K1TA70 Series Face Recognition Terminal User Manual Figure 9-13 Arm Device After turned on, the device(s) will be armed. And notifications about the events triggered by the armed device(s) will be automatically sent to the client software in real-time. 9.10.2 View Real-Time Events The real-time event information received by the client of the connected resources are displayed.
  • Page 179 DS-K1TA70 Series Face Recognition Terminal User Manual Filter by Device Type and (or) Select device type(s) and (or) priorities to filter Priority events. Filter by Keywords Enter the keywords to filter the events. 3. Optional: Right-click the table header of the event list to customize the event related items to be displayed in the event list.

  • Page 180: Search Historical Events

    DS-K1TA70 Series Face Recognition Terminal User Manual 9.10.3 Search Historical Events You can search and view historical events by setting search conditions such as time, device type, and priority in the client. For the searched events, you can handle and export them.
  • Page 181 DS-K1TA70 Series Face Recognition Terminal User Manual Enter a key word (supports fuzzy search) to quickly search the target historical event(s). For example, you can enter a person's name to search the events related with this person. 3. Click Search to search the events according the conditions you set.
  • Page 182 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 9-15 Search Historical Event 4. Optional: Right click the table header of the event list to customize the event related items to be displayed in the event list. 5. Select an event in the event list to view the event details.

  • Page 183: Time And Attendance

    DS-K1TA70 Series Face Recognition Terminal User Manual Auto-Play Video Check Auto-Play Video to automatically play video when displaying event details. Enlarge Video or Double click the video image to view video in a larger window. ● Picture Put the cursor on the picture, and click to view picture in a larger ●...
  • Page 184 DS-K1TA70 Series Face Recognition Terminal User Manual Steps Note The parameters configured here will be set as default for the newly added time period. It will not affect the existed one(s). 1. Enter Time & Attendance module. 2. Click Attendance Settings → General Rule .
  • Page 185 DS-K1TA70 Series Face Recognition Terminal User Manual By default, all card readers of the added access control devices are set as start/end-work check points. If you need to edit check point function of card reader(s), you can perform the following operations.
  • Page 186 DS-K1TA70 Series Face Recognition Terminal User Manual Add Regular Holiday You can configure a holiday which will take effect annually on regular days during the effective period, such as New Year's Day, Independence Day, Christmas Day, etc. Steps 1. Enter the Time & Attendance module.
  • Page 187 DS-K1TA70 Series Face Recognition Terminal User Manual 10. Click OK. The added holiday will display in the holiday list and calendar. If the date is selected as different holidays, it will be recorded as the first-added holiday. 11. Optional: After adding the holiday, perform one of the following operations.
  • Page 188 DS-K1TA70 Series Face Recognition Terminal User Manual Note If you select MySQL, you should import the configuration file (libmysql.dll) from local PC. 5. Set the other required parameters of the third-party database, including server IP address, port No., database name, user name and password.
  • Page 189 DS-K1TA70 Series Face Recognition Terminal User Manual Must Check The break duration will be calculated and excluded from work hours according to actual check-in and check-out time. Return from Break Early for The actual check-in and check-out time does not exceed the break time, and can be marked as normal work or work overtime.

  • Page 190: Add General Timetable

    DS-K1TA70 Series Face Recognition Terminal User Manual Enter the mark and select the color. The related fields of attendance status in the report will display with the mark and color. Weekend Mark Enter the mark and select the color. The weekend fields in the report will display with the mark and color.
  • Page 191 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 9-16 Add Timetable 3. Create a name for the timetable. Note You can click the color icon beside the name to customize the color for the valid timetable on the time bar in the Configuration Result area.
  • Page 192 DS-K1TA70 Series Face Recognition Terminal User Manual You need to set Valid Authentication Interval for this calculation method. For example, if the interval between card swiping of the same card is less than the set value, the card swiping is invalid.

  • Page 193: Add Shift

    DS-K1TA70 Series Face Recognition Terminal User Manual Delete Timetable Select a timetable from the list and click Delete to delete it. 9.11.3 Add Shift You can add shift for employees including setting shift period (day, week, month) and the effective attendance time.
  • Page 194 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 9-17 Add Shift Note You can select more than one timetables. The start and end work time and the valid check-in and out time in different time tables can not be overlapped.
  • Page 195 DS-K1TA70 Series Face Recognition Terminal User Manual Figure 9-18 Add Multiple Timetables 6. Click Save. The added shift lists on the left panel of the page. At most 64 shifts can be added. 7. Optional: Assign the shift to organization or person for a quick shift schedule.

  • Page 196: Manage Shift Schedule

    DS-K1TA70 Series Face Recognition Terminal User Manual On the holidays, this schedule is still effective and the persons needs to go to work according to the schedule. Effective for Overtime The persons' overtime will be recorded for this schedule. 5) Click Save to save the quick shift schedule.
  • Page 197 DS-K1TA70 Series Face Recognition Terminal User Manual If the multiple shift schedules contains three timetables: 00:00 to 07:00, 08:00 to 15:00 and 16:00 to 23:00. The attendance of the person adopting this multiple shift schedules will be effective in any of the three timetables. If the person checks in at 07:50, it will apply the nearest timetable 08:00 to 15:00 to the person's attendance.
  • Page 198 DS-K1TA70 Series Face Recognition Terminal User Manual Note This is only available for shift with only one timetable. Multiple Shift Schedules It contains more than one timetables. The person can check in/out in any of the timetables and the attendance will be effective.

  • Page 199: Manually Correct Check-In/Out Record

    DS-K1TA70 Series Face Recognition Terminal User Manual 4. Click one date or click and drag to select multiple dates for the temporary schedule. 5. Select Workday or Non-Workday from drop-down list. If Non-Workday is selected, you need to set the following parameters.

  • Page 200: Add Leave And Business Trip

    DS-K1TA70 Series Face Recognition Terminal User Manual Before You Start You should add organizations and persons in Person module. For details, refer to Person ● Management . The person's attendance status is incorrect. ● Steps 1. Click Time & Attendance → Attendance Handling to enter attendance handling page.

  • Page 201: Calculate Attendance Data

    DS-K1TA70 Series Face Recognition Terminal User Manual Before You Start You should add organizations and persons in the Person module. For details, refer to Person Management . Steps 1. Click Time & Attendance → Attendance Handling to enter attendance handling page.
  • Page 202 DS-K1TA70 Series Face Recognition Terminal User Manual Automatically Calculate Attendance Data You can set a schedule so that the client can automatically calculate attendance data of the previous day at the time you configured every day. Steps Note 1. Enter the Time & Attendance module.

  • Page 203: Attendance Statistics

    DS-K1TA70 Series Face Recognition Terminal User Manual Note The report items will be displayed in the sequence you have set. Export Report Click Export to export attendance data (CSV file) to local PC. Note The report items will be displayed in the sequence you have set.
  • Page 204 DS-K1TA70 Series Face Recognition Terminal User Manual 7. Optional: Click Reset to reset all the search conditions and edit the search conditions again. 8. Click Search. 9. Optional: For the displayed search results, perform one of the following operations. Edit Attendance...
  • Page 205 DS-K1TA70 Series Face Recognition Terminal User Manual Steps 1. Enter the Time & Attendance module. 2. Click Attendance Statistics → Regularly Send Report . 3. Click Add to enter the add custom report page. 4. Set the report content. Report Name Enter a name for the report.

  • Page 206: System Configuration

    DS-K1TA70 Series Face Recognition Terminal User Manual 7. Optional: After adding the custom report, you can do one or more of the followings: Edit Report Select one added report and click Edit to edit its settings. Delete Report Select one added report and click Delete to delete it.

  • Page 207: Set Picture Storage

    DS-K1TA70 Series Face Recognition Terminal User Manual After enabled, the client can automatically detect the new software version and remind the user to upgrade the software. Automatic Time Synchronization Automatically synchronize the time of the added devices with the time of the PC running the client at a specified time point.

  • Page 208: Set Alarm Sound

    DS-K1TA70 Series Face Recognition Terminal User Manual 9.12.3 Set Alarm Sound When the event is triggered, the client can give an audible warning to notify the security personnel. You can set the sound of the audible warning in this section.

  • Page 209: Set File Saving Path

    DS-K1TA70 Series Face Recognition Terminal User Manual Max. Speaking Duration with Access Control Device Specify the seconds that the call with access control device will last for at most. The maximum speaking duration between access control device and the client can be set from 90s to 120s.

  • Page 210: Operation And Maintenance

    DS-K1TA70 Series Face Recognition Terminal User Manual Enter the user name of the sender email address if Server Authentication is checked. Password Enter the password of the sender Email address if Server Authentication is checked. Receiver 1 to 3 Enter the email address of the receiver. Up to 3 receivers can be set.

  • Page 211: View Device Information

    DS-K1TA70 Series Face Recognition Terminal User Manual 9.14.1 View Device Information View and set device name, view device type, serial No., version, relay number, and lock number. Select a device from the Device for Management tab and click → System → Device Information to enter the Device Information page.

  • Page 212: Change Device Password

    DS-K1TA70 Series Face Recognition Terminal User Manual 9.14.2 Change Device Password You can change the device password. Before You Start Make sure the device is activated. For details, see Activation. Steps 1. On the Device for Management page, click → System → User to enter the User tab.

  • Page 213: System Maintenance

    DS-K1TA70 Series Face Recognition Terminal User Manual After you enable Manual Time Synchronization, you can manually set the device time. If you check Synchronize with Computer Time, the Set Time will display the current computer's time. At this time, uncheck Synchronize with Computer Time, and click , you can edit the device time manually.

  • Page 214: Configure Rs-485 Parameters

    DS-K1TA70 Series Face Recognition Terminal User Manual Note The configuration file contains the device parameters. Export Configuration File Export the configuration file from the device to the local PC. Note The configuration file contains the device parameters. Upgrade On the Device for Management page, click Remote Configuration → System → System Maintenance to enter the System Maintenance tab.

  • Page 215: Security Mode Settings

    DS-K1TA70 Series Face Recognition Terminal User Manual 9.14.6 Security Mode Settings Set the security mode for logging in the client software. On the Device for Management page, click → System → Security to enter the Security Mode tab. Select a security mode from the drop-down list, and click Save.

  • Page 216: Network Center Parameters Settings

    DS-K1TA70 Series Face Recognition Terminal User Manual Main Channel The device will communicate with the center via the main channel. Note N1 refers to wired network. 9.14.9 Network Center Parameters Settings You can set the notify center, center's IP address, the port No., the protocol (EHome), the EHome account user name,etc.

  • Page 217: Set Access Control Parameters

    DS-K1TA70 Series Face Recognition Terminal User Manual 9.14.12 Set Access Control Parameters Steps 1. On the Device for Management page, click → Others → Access Control Parameters to enter the Access Control Parameters tab. 2. Check the checkbox to enable the function.

  • Page 218: Configure Face Picture Parameters

    DS-K1TA70 Series Face Recognition Terminal User Manual Click Other → Face Recognition Terminal Parameters and you can configure the device parameters. Face Picture Database Select Deep Learning as the face picture database. Save Authenticating Face Picture If enabled, the captured face picture when authenticating will be saved on the device.

  • Page 219: Configure Supplement Light Parameters

    DS-K1TA70 Series Face Recognition Terminal User Manual The distance percentage from the face left side to the left margin in the recognition area. The actual distance percentage should be larger than the configured value when face picture authentication. Other percentages, distances, and angles should also meet their conditions.

  • Page 220: Set Device No

    DS-K1TA70 Series Face Recognition Terminal User Manual 9.14.16 Set Device No. Set the device type, community No., building No., floor No., and unit No., and room No. Click Maintenance and Management → Device to enter the device list. Click to enter the remote configuration page.
  • Page 221 DS-K1TA70 Series Face Recognition Terminal User Manual Click to enter the remote configuration page. Click Status → Relay and you can view the relay status.

  • Page 222: Appendix A. Tips When Collecting/Comparing Face Picture

    DS-K1TA70 Series Face Recognition Terminal User Manual Appendix A. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below: Positions (Recommended Distance: 0.5 m) Expression Keep your expression naturally when collecting or comparing face pictures, just like the ●...
  • Page 223 DS-K1TA70 Series Face Recognition Terminal User Manual Size Make sure your face is in the middle of the collecting window.

  • Page 224: Appendix B. Tips For Installation Environment

    DS-K1TA70 Series Face Recognition Terminal User Manual Appendix B. Tips for Installation Environment 1. Light Source Illumination Reference Value Candle: 10Lux Bulb: 100~850Lux Sunlight: More than 1200Lux 2. Install the device at least 2 meters away from the light, and at least 3 meters away from the window or door.

  • Page 225: Appendix C. Dimension

    DS-K1TA70 Series Face Recognition Terminal User Manual Appendix C. Dimension...

  • Page 226: Appendix D. Communication Matrix And Device Command

    Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure D-2 Device Command...
  • Page 227 UD22684B-D...

This manual is also suitable for:

Ds-k1ta70mi-t

Table of Contents