Removing The Drive-Panel Insert - Dell Dimension 3100/E310 Service Manual

Table of Contents

Advertisement

5. Replace the
 
6. Uninstall the driver for the card that you removed.
 
7. If you removed a sound card:
a.  Enter
b.  Connect external audio devices to the audio connectors on the back panel of the computer.
 
8. If you removed an add-in network connector:
a.  Enter
b.  Connect the network cable to the integrated connector on the back panel of the computer.
 Drive Panels
CAUTION:
CAUTION:
 
Removing the Drive Panel
 
1. Follow the procedures in
1 drive panel
2 sliding plate
3 sliding plate lever
 
2. Grasp the sliding plate lever and push it towards the base of the computer until the drive panel snaps open.
NOTE:
This sliding plate secures and releases the drive panel and helps to secure the drives.
 
3. Pivot the drive panel outward and lift it from its side hinges.
 
4. Set the drive panel aside in a secure location.
 

Removing the Drive-Panel Insert

 
Great user manuals database on
computer
cover, reconnect the computer and devices to electrical outlets, and then turn them on.
system
setup, select Audio Controller, and then change the setting to On.
system
setup, select Network Controller, and then change the setting to On.
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
"Before You
Begin."
UserManuals.info

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcsm

Table of Contents