Features Top view Bottom view 1. Left button 2. Scroll touch-strip 3. Power/Battery LED 4. Right button 5. Key plate 6. Optical sensor 7. Bluetooth channel LEDs 8. Battery compartment cover (magnetic) 9. Bluetooth pairing button Features │ 5...
Dell Peripheral Manager The Dell Peripheral Manager application enables you to manage and set up various Dell Peripherals connected to your computer. For Dell Bluetooth Travel Mouse MS700, Dell Peripheral Manager software enables you to perform the following: • Adjust touch scroll sensitivity.
Setting up your wireless mouse 1. Locate the slot at the bottom of the battery compartment cover. Using your fingertip, pry open the battery compartment cover. 2. Slide and unlock the battery compartment latch. 3. Install the AAA batteries into the battery compartment. Setting up your wireless mouse │...
Page 8
4. Slide and lock the battery compartment latch. 5. Replace the battery cover. The power LED gets activated immediately when the mouse is turned on. Turn off after three seconds. NOTE: By default, the mouse turns on after inserting the batteries. 8 │...
Page 9
Turning off the mouse Rotate the rear key plate counter-clockwise to turn off the mouse. Setting up your wireless mouse │ 9...
Pairing your wireless mouse using Dell Pair Dell Pair supports the following: • Detect Dell peripheral devices like mouse and keyboard when they are within the detection range • Seamlessly pair devices through Bluetooth NOTE: Dell Pair user guide is common to all supported Dell peripherals. For features specific to the device, please refer to the product user guide.
Page 11
) blinks white, indicating the Bluetooth pairing is initiated. 3. Dell Pair pops up a notification when a device supporting detection by Dell Pair, is turned on and brought close to the Bluetooth detection range of the computer for the first time. Click Pair to proceed with seamless pairing of the device using Bluetooth.
) blinks white, indicating the Bluetooth pairing is initiated. 7. The New Dell MS700 found window appears. Click Connect and confirm the pairing process on both wireless mouse and your computer. 12 │ Pairing your wireless mouse using Swift Pair...
Select Start > Settings > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth. b. Select Dell MS700 and then Done. NOTE: If Dell MS700 is not listed, ensure that the pairing mode is enabled on the mouse. Pairing your wireless mouse using Bluetooth │ 13...
Page 14
4. Confirm the pairing process on both mouse and your computer. The first Bluetooth channel LED ( ) turns solid white for a few seconds to confirm the pairing, and then the light turns off. After your mouse and computer pairing is completed, the mouse connects to the computer automatically when the Bluetooth is enabled and both devices are within the Bluetooth range.
7. Click Add Bluetooth or other device. The Add a device dialog box appears. The detected devices appear on the screen of your second device. 8. From the list of devices, click Dell MS700. 9. Click Done to complete the Bluetooth pairing in your device.
Page 16
7. Click Add Bluetooth or other device. The Add a device dialog box appears. The detected devices appear on the screen of your third device. 8. From the list of devices, click Dell MS700. 9. Click Done to complete the Bluetooth pairing in your device.
Page 17
Switching between paired devices Press the Bluetooth pairing button repeatedly on the mouse to switch to the required pairing mode (Identity A, Identity B, or Identity C). The mouse reconnects to your paired device. Pairing multiple devices with your Bluetooth mouse │ 17...
Connection type Wireless (Bluetooth) System requirement • Windows 10 and Windows 11 with BLE5.0 supporting DPeM include OTA(BLE 4.2+), Dell Pair features • Microsoft Swift Pair Supported operating systems • Windows 10, 32/64-bit • Windows 11 • Windows 8.1, 32/64-bit •...
Troubleshooting Problems Possible solutions Mouse is not functioning 1. Check if the batteries are inserted in the correct orientation. The battery “+” and “-” ends should be placed as indicated on the battery compartment. 2. Check the battery level. • If the mouse is using rechargeable batteries, ensure that the batteries are fully charged.
Page 21
Problems Possible solutions Bluetooth pairing button 1. Check if the batteries are inserted in the correct does not work orientation. The battery “+” and “-” ends should be placed as indicated on the battery compartment. 2. Check the battery level. •...
Page 22
The Bluetooth channel LED blinks white to indicate the Bluetooth pairing is initiated. 8. Check if your computer is included in the list of selected Dell computers compatible with the mouse. For more information, see www.dell.com/support. 22 │ Troubleshooting...
Page 23
Problems Possible solutions Wireless connection is lost 1. Check the battery level. • If the mouse is using rechargeable batteries, ensure that the batteries are fully charged. • If the mouse is using replaceable batteries, replace them with new batteries. 2.
Page 24
• If Bluetooth device is brought near computer and is in pairing mode, the dell pair UI aids pairing. • Wait for pairing error User Interface (UI) to auto- dismiss. • Move the Bluetooth device far away from the computer.
Dell’s end user contract terms. Dell may also provide an additional hardware warranty – full details of the Dell end user contract and warranty terms can be found by going to Dell.com/terms, selecting your country from the list at the bottom of the “home”...