Casio 3118 Operation Manual

MA0707-EA
About This Manual
General Guide
• Press C to change from mode to mode.
Timekeeping Mode
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
• Pressing D in the Timekeeping Mode will toggle between the Day of the Week
screen and the Date screen.
Day of the Week Screen
Day of week
PM indicator
Read this before you set the time and date !
The times displayed in the Timekeeping Mode and World Time Mode are linked.
Because of this, make sure you select a city code for your Home City (the city where
you normally use the watch) before you set the time and date.
• To view the current Home City code setting, press A while in the Timekeeping
Mode.
• For full information on city codes, see the "City Code Table".
To set the time and date
Seconds
Day
3. When the setting you want to change is flashing, use D and B to change it as
described below.
Screen To do this:
Reset the seconds to
Change the city code
Toggle between Daylight Saving Time (
and Standard Time ( )
Change the hour or minutes
Change the year, month, or day
• See "Daylight Saving Time (DST)" for details about the DST setting.
4. Press A to exit the setting screen.
• Resetting the seconds to
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to without changing the minutes.
• The year can be set in the range of 2000 to 2099.
• The watch's built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch's battery replaced.
• The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
• A leading zero is added to days from 1 through 9.
Example: The 1st of the month is displayed as 01.
Operation Guide 3118
• Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
• Button operations are indicated using the letters shown
in the illustration.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the "Reference" section.
World Time Mode
Press .
Date Screen
Day Month, Day
Press .
Hour : Minutes Seconds
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select other settings.
City Code DST Hour
Month Year Minutes
Do this:
Press D.
Use D (east) and B (west).
Press D.
)
Use D (+) and B (–).
Use D (+) and B (–).
while the current count is in the range of 30 to 59
Alarm Mode Stopwatch Mode
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from Standard
Time. Remember that not all countries or even local areas use Daylight Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
DST indicator
World Time
City code
Current time in the zone
of the selected city code
To toggle a city code time between Standard Time and Daylight Saving Time
DST indicator
Alarms
Alarm number
Alarm time
(Hour : Minutes)
Countdown Timer Mode
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C twice to display the DST setting screen.
3. Press D to toggle between Daylight Saving Time (
and Standard Time ( ).
4. Press A to exit the setting screen.
• The DST indicator is displayed on the Timekeeping
Mode and Alarm Mode screen while Daylight Saving
On/Off status
Time is turned on.
World Time shows the current time in 48 cities (29 time
zones) around the world.
• All of the operations in this section are performed in the
World Time Mode, which you enter by pressing C.
To view the time for another city code
In the World Time Mode, press D to scroll eastward
through city codes or B to scroll westward.
• For full information about city codes, see the "City Code
Table".
• If the current time shown for a city is wrong, check your
Timekeeping Mode time and Home City code settings
and make the necessary changes.
1. In the World Time Mode, use D and B to display the
city code (time zone) whose Standard Time/Daylight
Saving Time setting you want to change.
2. Hold down A for about one second to toggle between
Daylight Saving Time (DST indicator displayed) and
Standard Time (DST indicator not displayed).
• The DST indicator is on the display whenever you
display a city code for which Daylight Saving Time is
turned on.
• Note that the DST/Standard Time setting affects only the
currently displayed city code. Other city codes are not
affected.
• In the World Time Mode, you can switch the city code
you currently have selected as your Timekeeping Mode
Home City between Standard Time and DST. The
setting you select in the World Time Mode also will be
applied in the Timekeeping Mode.
You can set five independent Daily Alarms. When an
alarm is turned on, the alarm tone sounds when the alarm
time is reached.
You can turn on an Hourly Time Signal that causes the
watch to beep twice every hour on the hour.
• There are six screens in the Alarm Mode. Five are for
alarms (indicated by numbers from
), and one is for the Hourly Time Signal (indicated
by ).
• You can select any one of three alarm beeper patterns.
• All of the operations in this section are performed in the
On/Off status
Alarm Mode, which you enter by pressing C.
Edit Mode
)
through
1