Auto Battery Power Saver; The Display - Cobra MicroTalk Professional 2-WAY RADIO Operating Instructions Manual

Cobra PR 1000 manual (4216 copy
Operation
Illuminating Illuminating the Display

the Display

Press and release
display for ten seconds.
Caution
Caution
Do not use an external speaker / microphone
with common ground circuits with this radio. The
radio's BTL (Bridge Tied Load) Audio Circuit would
be overloaded and become damaged over time.
We recommend you use Cobra's authorized
accessories.
4
12/4/00 4:08 PM Page 4
PRESS AND
RELEASE
MON Button to illuminate

Auto Battery Power Saver

Your microTalk Professional has a unique circuit
designed to extend battery life. If there are no
transmissions within 10 seconds, the unit will
automatically switch to mode.
The icon will flash.
High/Low Power
When in close proximity to other party, or during
clear weather conditions you can switch from
High to Low Power to extend battery life.
Press & Release the
lock button and it
will switch from
High to Low
PRESS AND
RELEASE
QUICKLY
Operation
Auto Battery
Power Saver
POWER
Note
SAVER
The Auto Battery Save Circuit
does not effect the unit 's ability
to receive incoming transmis-
sions.
High/Low
Power
5