Getting started
1 Connect the small plug into the bottom of the base and connect
the power plug in any 100-240V power outlet.
2 Remove the reservoir from the base.
Note: Make sure the product is powered off before you remove the
reservoir.
3 Open the lid, fill the reservoir with lukewarm water to the MAX fill
line.
4 Close the lid. Place the reservoir back on the base.
Note: Press down firmly to ensure there is no gap between the
reservoir and the base.
5 Insert your preferred nozzle into the handle. Press the nozzle
down until you hear a "click".
HX3711_22_A6_cc2020_EN.indd
HX3711_20_A6_cc2020_EN.indd
27
27
27
English
2020/06/15
2020/06/15
13:44:07
13:44:07