Table of Contents
Advertisement
Dell EMC PowerEdge R440 system overview
The Dell EMC PowerEdge R440 system is a 1U, dual socket rack system supports up to:
● Two Intel Xeon Scalable Processors
● 16 DIMM slots
● 4 x 3.5-inch drives, 8 x 2.5-inch drives, or 10 x 2.5-inch drives
● Four NVMe drives on 10 x 2.5-inch drive system
● Two redundant power supply units (PSU) or single cabled PSU (no longer offering)
NOTE:
All instances of SAS, SATA hard drives and SSDs are referred to as drives in this document, unless specified
otherwise.
Topics:
•
Front view of the system
•
Back view of the system
•
LCD panel
•
Locating the Service Tag of your system
•
System Label Information
Front view of the system
The front view displays the features available on the front of the system.
Figure 1. Front view of 8 x 2.5-inch drive system
Table 1. Features available on the front of the system
Item
Ports, panels, and
slots
1
Left control panel
Icon
Description
N/A
Contains the system health and system ID, status LED, and the
iDRAC Quick Sync 2 (wireless) indicator.
● Status LED: Enables you to identify any failed hardware
● Quick Sync 2 (wireless): Indicates a Quick Sync enabled
NOTE:
The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
components. There are up to five status LEDs and an overall
system health LED (Chassis health and system ID) bar. For
more information, see the
Status LED indicators
system. The Quick Sync feature is optional. This feature
allows management of the system by using mobile
devices. This feature aggregates hardware or firmware
inventory and various system level diagnostic and error
information that can be used in troubleshooting the
system. For more information, see the Integrated Dell
Dell EMC PowerEdge R440 system overview
1
section.
7
Advertisement
Table of Contents
