Table of Contents
Advertisement
Working with the notebook
Wireless components: wireless LAN / Bluetooth
/ LTE / 5G (optional)
The installation of radio components not approved by Fujitsu will invalidate
the certifications issued for this device.
Switching the wireless components on and off
► Press the key with the radio symbol
mode).
Bluetooth
WirelessLAN
Bluetooth
WirelessLAN
If you switch off the radio components, the wireless LAN antenna and the
Bluetooth and LTE module will also be switched off.
Pay attention to the additional safety notes for devices with wireless components
provided in the "Safety/Regulations" manual.
You can obtain more information on LTE from your service provider.
Setting up WLAN access
•
Requirement: A WLAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
Access via LTE / 5G (optional)
You can purchase the accessories for LTE reception from your retailer
or your Fujitsu Technology Solutions dealer.
If you have ordered an LTE or 5G module, your device is already pre-set on delivery.
For information about connecting with the LTE or 5G network, please see the
documentation for the hardware that you will be using.
Your device can connect with the Internet via the LTE module. To do this,
use one of the following types of connection:
•
USB dongle
a USB stick with your mobile phone provider's SIM card
•
a mobile end-device (e.g. mobile phone) with Bluetooth connection
•
a mobile end-device (e.g. mobile phone) with data cable
40
to switch the wireless components on and off (flight
Fujitsu
Advertisement
Table of Contents
