Linksys WPG12 Quick Installation

This Quick Installation is meant to help you install the product quickly and easily. For detailed instructions on installation,
configuration, and further setup options, please consult the User Guide on the Setup CD-ROM.
Instant Wireless™ Series
P P r r e e s s e e n n t t a a t t i i o o n n P P l l a a y y e e r r
WPG12
Minimum Requirements Package Contents
One PC with the following: • One Instant Wireless Presentation Player
• 200MHz or Higher CPU (1)
• Windows 98, Me, 2000, or XP • Two Removable Antennas (2)
• 128MB RAM • One Power Adapter (3)
• CD-ROM Drive • One Remote Control with Built-in Laser
• 802.11b Wireless Adapter or Ethernet Pointer (two AAA batteries included) (4)
Connection (for remote presentations) • One Setup CD-ROM with User Guide (5)
• Microsoft PowerPoint (needed to upload • Quick Installation guide and Registration
presentations to the Presentation Player) Card
Connecting the Presentation Player
A. Connect the VGA cable from your moni-
tor or projector to the Presentation
Player's To Monitor/Projector port.
B. Make sure the Presentation Player is
turned off. Plug the supplied power
adapter into the jack on the Presentation
Player's back panel. Then plug the other
end into a power outlet (surge protection
A
recommended). Turn on the Presentation
Player.
C. Connect one end of the Category 5
Ethernet network cable to your PC's
Ethernet adapter. Connect the other end
to the LAN port on the back of the
Presentation Player.
Proceed to Step 2.
C
Installing the Control Utility for the
Presentation Player
The Presentation Player can play from any PC in your wireless network. You
must install the Control Utility in each PC that will use the Presentation Player.
A. Insert the Setup CD-ROM into your
CD-ROM drive. The Setup Wizard
should start automatically, and the
Welcome screen should appear. If it
does not start automatically, click
the Start button, and select Run.
Then enter d:\setup.exe in the
Open field (if "D" is the letter of
your CD-ROM drive).
A
B. Click the Install tab.
C. Click the Next button.
D. After reading the Warranty Policy, click Yes if you agree, or No to end the
installation.
E. The Choose Destination Location screen will appear. If you want to change
the location where the Control Utility will be installed, click Browse, and
select another location. Click the Next button to continue.
F. The Wizard will ask you to review your settings before it starts to copy files.
Click Next if you are satisfied with your settings, or click Back to change
any settings.
G. After the files have been successfully copied, click the Exit button.
Proceed to Step 3.
Using the Presentation Player's
Web-based Utility
The Presentation Player has been designed to function using the default set-
tings of the Web-based Utility. However, if you'd like to change these set-
tings, you can access the Web-based Utility using your PC's web browser.
A. To access the Web-based Utility, open your PC's web browser. In the
Address field, enter the Presentation Player's IP address (default is
192.168.1.200), and press the Enter key.
Important: Make sure the PC is configured for the same subnet that the
Presentation Player uses. For example, if the Presentation Player's IP address
is 192.168.1.200, then your PC should have an IP address of 192.168.1.xxx
(the "xxx" represents any number).
If you need to find the Presentation Player's IP address, make sure that the
Presentation Player is connected to the projector or monitor and that both
devices are powered on. The IP address is displayed at the bottom of the
Home screen, which is the first screen that appears after the Presentation
Player and monitor or projector are powered on.
B. A Login screen will appear.
Enter the Password (default is
admin). Then click OK. Later
you can set a new password
using the Password screen of
the Web-based Utility.
C. The Setup screen displays the
available basic setup func-
tions. Most users can use the
C
default settings, but you can
change them here if you wish.
Continued on back