Linksys WPC4400N Quick Installation

Wireless-N
Business
Notebook
Adapter
Package Contents
• Wireless-N Business Notebook Adapter
• Setup Wizard CD-ROM
• User Guide (English only) on CD-ROM
• Quick Installation
QUICK INSTALLATION
BUSINESS SERIES
Model No.
Model No.
1
1
Begin Installation
IMPORTANT: IMPORTANT: Do not install the Adapter in your PC until
you are instructed to do so in Step 2 or the Adapter will not install
correctly.
A
The Notebook Adapter is
installed and set up using the
Setup Wizard that comes on
the enclosed CD.
B
To begin, insert the Setup
Wizard CD-ROM into your
CD-ROM drive. The Setup Wiz-
ard should run automatically,
and the Welcome screen
should appear.
C
To install the Adapter, click
Click Here to Start on the
Welcome screen.
C
D
After reading the License
Agreement, click Next to con-
tinue the installation and Win-
dows will begin copying the
files onto your PC.
E
Windows will begin copying
the files onto your PC.
F
The Setup Wizard will now
prompt you to install the
Adapter into your PC.
D
Proceed to Step 2.
2
Connect the Adapter
Go to the section for your Windows
operating system.
Windows XP
A
Locate an available CardBus
slot on your notebook PC.
B
With the connector pin end
facing the CardBus slot and
the label facing up, slide the
Adapter into the CardBus slot
until it locks in place.
Then, click Next. Connecting
the Adapter
C
If you have Windows XP with
Service Pack 2, the Welcome
to the Found New Hardware
Wizard screen appears, click
Next.
C
D
If the Found New Hardware
screen appears, make sure
that Install the Software Auto-
matically (Recommended) is
selected, then click Next.
D
E
Windows will begin copying
the driver files to your com-
puter.
F
When the Wizard has finished
installing the software, click
Finish.
Proceed to Step 3.
F