Installing The Network Pc Card; Installing The Network Pc Card In Your Notebook Pc; Installing The Drivers And Configuration Utility For Windows Nt; Overview - Linksys WPC11 User Manual

Network pc card instant wireless series
Hide thumbs Also See for WPC11:
Table of Contents

Advertisement

Installing the Network PC Card

Installing the Network PC Card In Your Notebook PC

1. While the computer is restarting and before the Windows desktop appears,
locate an available Type II or Type III PCMCIA slot on your notebook com-
puter.
2. With the PCMCIA adapter's 68-pin connector facing the PCMCIA slot
and the "Network PC Card" label facing up, slide the PCMCIA adapter com-
pletely into the PCMCIA slot.
3. You may see several screens appear as the driver installation is finalized,
but this is normal. No input should be necessary, and the screens should dis-
appear when the card is ready for use.
The Hardware Installation is complete. Your Wireless Network PC Card
is set up and ready for use. You may continue reading to learn about the
card's Configuration Utility in the Configuration Utility section.
14
Instant Wireless
TM
Series
Network PC Card
Installing the Drivers and
Configuration Utility for Windows
NT

Overview

The installation of the Network PC Card is different for users of Windows NT
because it is not a Plug-and-Play (PnP) system. This means it will not auto-
matically detect the presence of the Card when it is inserted. Consequently, the
order of the installation is different. The steps involved in the installation are
different, as well. If you are using any other operating system than Windows
NT, stop here and refer to the section called Installing the Drivers and
Configuration Utility for Windows 95, 98, ME, and 2000.
Installing the Network PC Card In Your Notebook PC
1. While the computer is restarting and before the Windows desktop appears,
locate an available Type II or Type III PCMCIA slot on your notebook com-
puter.
2. With the PCMCIA adapter's 68-pin connector facing the PCMCIA slot
and the "Network PC Card" label facing up, slide the PCMCIA adapter com-
pletely into the PCMCIA slot.
The Hardware Installation is complete.
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wpc11 v2.5

Table of Contents