Linksys WPC11 Quick Installation page 2

If you chose Infrastructure...
7. The following screen will appear. You will be prompted to
enter an SSID value in the box provided. The SSID may be
up to 32 characters in length and may include any character
on the keyboard. All SSID values on your wireless network
must match. If you are unsure, use the default value of
"linksys". Then, click the Next button.
8. The next screen to appear will be the Review Settings screen.
Verify that all the settings are correct and click the Next but-
ton to continue. Another screen will appear, indicating that
all of the appropriate files are being copied onto your drive.
9. Once Windows has finished copying the necessary files, the
following screen will appear. In order for the drivers to be
installed properly, you must restart your computer.
If you choose to do it now, select Yes, I want to restart my
computer now. If you do not want to do it now, choose No,
I will restart my computer later. Once you have made your
choice, click the Finish button to continue.
The Driver and Configuration Utility Installation is com-
plete. Refer to your User Guide for instructions on
physically installing your Network PC Card.
If you chose Ad-Hoc...
7. The following screen will appear. You will be prompted to
choose a Channel from the list provided. All computers on
your wireless network must be using the same channel in
order to communicate with each other. If you are unsure
about which channel to use, select the default channel
(Channel 6). Once you have chosen your channel, click the
Next button.
8. The following screen will appear. You will be prompted to
enter an SSID value in the box provided. The SSID may be
up to 32 characters in length and may include any character
on the keyboard. All SSID values on your wireless network
must match. If you are unsure, use the default value of
"linksys". Then, click the Next button.
9. The next screen to appear will be the Review Settings screen.
Verify that all the settings are correct and click the Next but-
ton to continue. Another screen will appear, indicating that
all of the appropriate files are being copied onto your drive.
10. Once Windows has finished copying the necessary files, the
following screen will appear. In order for the drivers to be
installed properly, you must restart your computer. If you
choose to do it now, select Yes, I want to restart my com-
puter now. If you do not want to do it now, choose No, I
will restart my computer later. Once you have made your
choice, click the Finish button to continue.
The Driver and Configuration Utility Installation is com-
plete. Refer to your User Guide for instructions on
physically installing your Network PC Card.