Linksys WMLS11B Quick Installation

1
Connect the Media Link for Setup
®
A Division of Cisco Systems, Inc.
Before you set up the Media Link, connect it to your wired computer. If you
want to set up the Media Link using its front panel LCD screen (without using
a computer), refer to the User Guide on the CD-ROM.
A
Connect the included Ethernet
network cable to an Ethernet
network port on your
computer.
B
Connect the other end of the
cable to the Ethernet port on
the Media Link's back panel.
C
Move the Media Link's
crossover (X-II) switch to the
Crossover (X) position.
D
Plug the power adapter into
the Media Link's Power port,
and plug the other end into an
Package Contents
electrical outlet.
• Wireless-B Media Link for Music
E
• Setup Wizard CD-ROM
The Media Link will
• User Guide on CD-ROM
automatically power on, and
• Quick Installation
the green LED adjacent to the
• Pair of Powered Speakers
• Remote Control Ethernet port will light up.
• Base Plate
• Network Cable F
Insert the bottom panel of the
• RCA Audio Cables
• AAA Batteries Media Link into the base plate.
• Speaker Power Cord
• Power Adapter G
Snap the Media Link into the
• Registration Card
base plate, so it fits snugly.
2.4
GHz Proceed to Step 2.
Wireless-B
802.11b
Music System
Wireless Quick Installation
WMLS11B
Model No.
4 Set up the Media Link and Install
2 2
the Media Server Software
A
Insert the Setup CD-ROM into
your computer's CD-ROM
drive. The Setup Wizard should
run automatically, and the
Welcome screen should
appear. If it does not, click the
Start button and choose Run.
In the field that appears, enter
D:\setup.exe (if "D" is the letter
of your CD-ROM drive).
B
Click Setup to run the Setup
A
Wizard.
A
C
Read the License Agreement,
and click Next to accept it.
D
Make sure the Media Link's
Ethernet LED is solidly lit. This
indicates that the Adapter is
properly connected to your
computer.Then click Next to
continue.
C
E
The screen shown in Figure E
D
displays a list of Wireless-B
Media Links for Music that have
been found on your network,
as well the settings for the
Media Link whose name is
highlighted. To select the
Media Link you are currently
installing, click its name in the
Adapters Found box. Then click
E
Next.
F
F H
Choose whether the Music If you will connect the Media
LInk to your PC or router using
System will be connected to
your wireless or wired network an Ethernet network cable
AFTER you have configured it. AFTER configuration, then go to
step J.
If you will connect the Music
If you will connect the Media
System to your computer or
router wirelessly, then click Yes Link to your computer or router
for the Wireless Network wirelessly AFTER configuration,
choice. F then the Basic Wireless Settings
screen will appear.
If you will connect the Media
Link to your computer or router For its mode, select
using an Ethernet network Infrastructure if the Media LInk
cable, then click Yes for the will communicate using an
Wired Network choice. access point or wireless router.
Select Ad-Hoc if it will
Click Next. communicate directly with a
wireless computer.
G
Enter a unique name for the
Adapter in the Device Name Enter the SSID or name of your
field. wireless network.
If your network has a router or If your network uses WEP
other DHCP server, select encryption, select Enable. If
Automatic for the Network not, select Disable, and go to
Step J.
Setting, and click Next.
G
If the Media LInk requires a Click Next.
static IP address, select Static
I
IP . Enter a unique IP address for Select a level of encryption,
64-bit or 128-bit, and enter a
the Media LInk, and then enter
the Subnet Mask, Default Passphrase. Click Generate.
Gateway, and DNS Server
settings of your network. Then If you want to enter the WEP
click Next. key manually, then complete
the KEY #1 field.
Click Next.
J
Review your settings. To save
your new settings, click Save.
K
The Media Services screen will
appear. To sign up for a free
trial of the Rhapsody Digital
Music Service, click Rhapsody
Digital Music Service. The
Media Link offers built-in
support of vTuner. For more J
information, click vTuner
Information.
Click Finish to continue.
L
For the Media LInk to work
H
properly, you must install the
Media Server software on at
least one computer. Click
Install Media Server and follow
the on-screen instructions.
L
After you have installed the
IMPORTANT:
Media Server software, follow these
instructions:
1 Run the program.
2 Click the Options menu.
3 Click Settings.
4 Click the CD Lookup/Connectivity
tab.
5 Click the checkbox next to Enable
Music Server.
6 Click the checkbox next to Universal
Plug and Play.
7 Click the OK button.
Go to Step 3.
I