Linksys WMA11B Quick Installation page 2

Connect the Wireless-B Media
3
Adapter to Your TV and Stereo
N A
The Wireless Security Settings Press the Adapter's power
screen will appear. To enable button on its front panel to
WEP encryption, select a level power it off.
of WEP encryption, 64-bit or
B
128-bit, and enter a Unplug the power adapter
Passphrase. If you want to enter from the Adapter's Power port
the WEP key manually, then and electrical outlet.
complete the KEY #1 field. N
C
Unplug the Ethernet network
cable from the Adapter's LAN
port and your computer's
NOTE: The Adapter's WEP settings must
Ethernet (LAN) port.
match the WEP settings of your existing
wireless network.
Make sure you keep the
computer powered on
To disable WEP encryption, because it will communicate
keep the default, Disabled. with the Adapter and send
music and pictures.
Click Next.
D
Move the Adapter and its
O
Review your settings on the power adapter to the TV.
Confirmation screen. To save
E
your new settings, click Save. If you have a stereo, go to the
"Connecting to Your TV and
P
On the Congratulations Stereo" section.
screen, click Exit. The Wireless-B
Media Adapter is now properly If you do not have a stereo, go
configured. O to the "Connecting to Your TV
Only" section.
P
Model No.
Connecting to Your TV and Stereo
B
C
A
If your TV has an S-video input, then connect the S-video cable to
the Adapter's S-video port and the TV's S-VIDEO IN port.
If your TV does NOT have an S-video input, then connect the yellow
connectors of the RCA cable to the Adapter's Video port and the
TV's VIDEO IN port.
NOTE: If your TV and stereo are located far apart from each other, you may
have to use a separate RCA cable for the audio connections described in
step B.
B
Connect the red and white connectors of the RCA cable to the
Adapter's Left and Right ports and the stereo's AUDIO IN ports.
C
Power on your TV. Select the TV channel or input that the Adapter will
use.
D
Power on your stereo, and select the stereo input that the Adapter
will use.
E
Proceed to "Step 4: Connect the Wireless-B Media Adapter to Your
Network."
Connect the Wireless-B Media
4
Adapter to Your Network
If the Adapter will connect to your
Connecting to Your TV Only
computer through your wireless net-
work, start with step B. Otherwise, start
with step A.
A
If the Adapter will connect to
your PC through your wired
network, then connect the
Ethernet network cable to the
Adapter's LAN port and an
Ethernet (LAN) port on a wired
network device, such as a
router or switch.
B
Connect the power adapter to
the Adapter's Power port and
A an electrical outlet.
If your TV has an S-video input, then connect the S-video cable to
the Adapter's S-video port and the TV's S-VIDEO IN port. C
Press the Power button on the
Adapter's front panel.
If your TV does NOT have an S-video input, then connect the yellow
connectors of the RCA cable to the Adapter's Video port and the
If the Adapter connects to your
TV's VIDEO IN port.
wireless network, the Wireless
B
LED will light up. Go to step D.
Connect the red and white connectors of the RCA cable to the
Adapter's Left and Right ports and the TV's AUDIO IN ports.
If the Adapter connects to your
C wired network, the Ethernet LED
Power on your TV. Select the TV channel or input that the Adapter will
will light up. If it does not, then
use.
push the Uplink button on the
D
Adapter's back panel. Power
Proceed to "Step 4: Connect the Wireless-B Media Adapter to Your
the Adapter off and back on
Network."
again. Make sure the cable
connections are secure.
D
The Adapter Utility on your PC
will automatically find the
Adapter on your wireless or
wired network. Then the main
menu of the Media Navigator
will appear on your TV. (This
may take a few seconds.)
D
E
Insert the batteries into the
remote control, and use the
arrow and Select buttons to
select songs and pictures.
Congratulations! The installation of
the Wireless-B Media Adapter is
complete.
B
For additional information or troubleshooting
help, refer to the User Guide on the Setup CD-
ROM. You can also call or e-mail for further
support.
24-hour Technical Support
800-326-7114
(toll-free from US or Canada)
E-mail Support
support@linksys.com
Website
http://www.linksys.com or
http://support.linksys.com
RMA (Return Merchandise Authorization)
http://www.linksys.com/support
FTP Site
ftp://ftp.linksys.com
Sales Information
800-546-5797 (800-LINKSYS)
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2003
Cisco Systems, Inc. All rights reserved.
WMA11B-QI-30905E JL