Linksys NAS200 Quick Installation Manual page 10

Installation
P.
Review the new settings. If they
are correct, click Save. If you would
like to change them, click Back to
return to the previous screen.
Q.
To confirm that you want to format
your drives and erase all data on
them, click Next.
WARNING:
drive(s), back up pre-existing
data because all data on
your drive(s) will be erased
when they are formatted.
NOTE:
is configured. You can map it to computers or use the Network
Storage System without mapping.
R.
The following steps map the
network drive(s) to your computer
for convenient access.
Click Set up Computer.
10
Before you format
When formatting is complete, the Network Storage System
Confirm New Settings Confirm New Settings
Confirm Formatting Confirm Formatting
Set up Computer Set up Computer