Digital Camera
Model No. DMC-FT6/DMC-TS6
Wi-Fi
®
Connection Guide
Let's connect to the Wi-Fi
You can connect Wi-Fi
®
compatible devices to the camera wirelessly.
You can connect them directly or via a wireless access point.
When connecting the camera to a
smartphone/tablet directly
Connecting the camera to a smartphone/tablet
1
Installing the smartphone/tablet app "Panasonic Image App"
Operation on the smartphone/tablet
1
Connect the smartphone/tablet to a network.
2
Android
TM
Select "Google Play
TM
Store".
iOS
Select "App Store
SM
".
3
Enter "Panasonic Image App" or "LUMIX" into the
search box.
4
Select "Panasonic Image App"
and install it.
Supported OS
For Android apps: Android 2.3.3 or higher
For iOS apps: iOS 6.0 or higher
(Please note that the iPhone 3GS is not supported.)
An
droid and Google Play are trademarks or registered trademarks of Google Inc.
App Store is a service mark of Apple Inc.
The Wi-Fi Protected Setup™ Identifi er mark is a certifi cation mark of Wi-Fi Alliance
®
"Wi-Fi
" is a registered trademark of Wi-Fi Alliance
"Wi-Fi Protected Setup™", "WPA™", and "WPA2™" are trademarks of Wi-Fi Alliance
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certifi cation marks of the Digital Living Network Alliance.
The camera is not capable of connecting to a wireless network via public
wireless LAN.
SQC0178
When connecting the camera to a TV or
PC, etc. via a wireless access point
SEE REVERSE SIDE
You can record/playback by
using the smartphone/tablet.
You can also save pictures
in the camera on the
smartphone/tablet.
The service may not be able to be used properly depending on the
type of smartphone/tablet being used. For compatible devices, see
the following support site.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
When downloading the app on a mobile network, high packet communication
fees may be incurred depending on the details of your contract.
®
.
®
.
®
.
2
Connecting the camera to the smartphone/tablet (Remote Shooting)
Connect by using the NFC function
This function can be used with the NFC compatible device with Android (OS version 2.3.3 or later). (excluding some models)
1
2
Image App
Image App
Launch "Image App" on
Touch the smartphone/tablet
the smartphone/tablet.
to the camera while [ ]
is displayed on the connection
screen of "Image App".
Connecting manually
Operation on the camera
1
2
Press camera [ON/OFF] button.
Select [New Connection].
Press [Wi-Fi].
Make sure the Wi-Fi connection
You can select the setting
lamp
is lit blue.
you used before from [History
Lit blue:
Connection].
The Wi-Fi connection is on standby
Please refer to "Owner's Manual
Blinking blue:
for advanced features (Operating
Sending/receiving data through the
Instructions for advanced
Wi-Fi connection
features)" (PDF) for details.
Operation on the smartphone/tablet
4
5
On the setting menu
Select the same SSID as
of your smartphone/
the one displayed on the
screen in step 3.
tablet, turn on the Wi-Fi
function.
Read the [Help] in the "Panasonic Image App" menu for further details on how to operate.
[When connecting for the fi rst time]
When the connection confi rmation screen is displayed, select [Yes], and
touch [
] on the smartphone/tablet again.
If the camera is not
recognized even when
touching the smartphone/
tablet, change positions
and try again.
Do not touch this camera
to the smartphone/tablet
strongly.
For information on the
operation and settings
1
of NFC-compatible
If you perform steps
and
smartphones/tablets, refer
performing single image playback on
to the operating instructions
of your device.
the camera, you can easily transfer
the image to the smartphone/tablet.
3
Select [Remote Shooting].
The SSID and password
are displayed.
To change the connection method, press [DISP.].
(Such as [WPS Connection], [Via Network], etc.)
Please refer to "Owner's Manual for advanced features (Operating Instructions
for advanced features)" (PDF) for details.
SSID refers to the name that is used to identify a network over a wireless LAN
connection. If the SSID matches for both devices, transmission is possible.
WPS (Wi-Fi Protected Setup
TM
) refers to a function that allows you to easily confi gure
the settings related to the connection and security of wireless LAN devices.
( The following is an example of when Android is being used.
Screens vary depending on your OS.)
6
7
Image App
Enter the password
Start "Image App" on
displayed on the screen
your smartphone/tablet.
in step 3, and connect.
When the connection is
established, the recording
screen is displayed.
2
while