Download Print this page
NEC N8146-40 User Manual
NEC N8146-40 User Manual

NEC N8146-40 User Manual

Dust proof bezel with sensor
Hide thumbs Also See for N8146-40:

Advertisement

Quick Links

N8146-40 スリムタワー用防塵ベゼル(センサ付)
はじめに
このたびは、本製品をお買い求めいただき、まことにありがとうございます。
本書は、本製品を正しく安全に設置・使用するための手引きです。本製品をご使用になる前に本書をよく
お読みになり、製品の取り扱いを十分にご理解ください。
また、本製品を本体装置に取り付ける際には、装置に添付のユーザーズガイド等に記載されている注意事項も
必 ず 読 み 、 ご 理 解 ・ ご 確 認 の 上 、 作 業 を 行 っ て く だ さ い 。 ユ ー ザ ー ズ ガ イ ド は 本 体 装 置 に 添 付 の
EXPRESSBUILDER DVD-ROMに格納されています。
本書は必要なときすぐに参照できるよう、お手元に置いておくようにしてください。
ご使用の前に「使用上のご注意」を必ずお読みください。
  使用上のご注意 − 必ずお読みください −
本製品を安全に正しくご使用になるために必要な情報が記載されています。
安全にかかわる表示について 
本書では、本製品を安全に正しくお使いいただき、お客様への危害や財産への損害を未然に防止するために、
次の絵表示を使用しています。内容をよく理解されてから、本文をお読みください。
本書では、危険の程度を表す用語として、「警告」と「注意」を使用しています。それぞれの用語は次のような
意味を持つものとして定義されています。
警告 
注意  
危険に対する注意・表示は次の2種類の記号を使用しています。それぞれの記号は次のような意味を持つもの
として定義されています。
 
注意の喚起  
 
行為の禁止  
注意の喚起
特定しない一般的な注意・警告を示します。 
行為の禁止
特定しない一般的な禁止を示します。 
行為の強制
本体装置の電源プラグをコンセントから抜い
てください。 火災や感電のおそれがあります。  
ユーザーズガイド
人が死亡する、または重傷を負うおそれがあることを示しています。 
火傷や怪我または物的損害を負うおそれがあることを示しています。 
この記号は危険が発生するおそれがあることを表しています。記号の
中の絵表示は危険の内容を図案化したものです。 
この記号は行為の禁止を表しています。記号の中や近くの絵表示は禁
止された行為の内容を図案化したものです。 
発煙や発火のおそれがあることを示しま
す。 
 
(例) 
 
 
(高温注意) 
(例) 
 
 
(分解禁止) 

Advertisement

loading

Summary of Contents for NEC N8146-40

  • Page 1 N8146-40 スリムタワー用防塵ベゼル(センサ付) ユーザーズガイド はじめに このたびは、本製品をお買い求めいただき、まことにありがとうございます。 本書は、本製品を正しく安全に設置・使用するための手引きです。本製品をご使用になる前に本書をよく お読みになり、製品の取り扱いを十分にご理解ください。 また、本製品を本体装置に取り付ける際には、装置に添付のユーザーズガイド等に記載されている注意事項も 必 ず 読 み 、 ご 理 解 ・ ご 確 認 の 上 、 作 業 を 行 っ て く だ さ い 。 ユ ー ザ ー ズ ガ イ ド は 本 体 装 置 に 添 付 の...
  • Page 2 安全上のご注意  安全にお使いいただくために、次に示す注意事項をお守りください。 警告   万一、煙、異臭、異音などが生じた場合は、ただちに電源をOFFにして電源プラグをコンセント から抜いてください。その後、お買い求めの販売店または保守サービス会社にご連絡ください。 そのまま使用すると火災の原因となります。 注意   注意事項を無視して本製品を取り扱うと、本体装置の故障、人体事故、火災、周辺機器の損傷を引き起こす 原因となることがあります。 本製品を本体装置へ取り付け、取り外しの際は必ず電源プラグをコンセントから抜き、外部装置と 接続しているケーブルを外してください。故障や感電する恐れがあります。    本体装置内部に手をいれるときには、指をはさんだり、ぶつけたりしないように注意してください。   本製品の取り付け、取り外しを行う前に、身近な金属(アルミサッシやドアのノブなど)に手を 触れて、身体の静電気を取り除くようにしてください。 指定した装置以外に取り付けないでください。指定以外の装置にたとえ取り付けることができても、 取り付けた装置の冷却機能が低下して正常に動作しないばかりか、 火災や故障の原因となるおそれが あります。 次に示すような場所や本書で指定している環境条件を超える場所には設置・保管しないでください。 火災や故障の原因となるおそれがあります。 ● 薬品や化学物質などを扱う場所 ● 直射日光が当たる場所 ● 湿気の多い場所 ● 不安定な場所 ● 急激な温度変化のある場所 ● 振動や衝撃のある場所 ● 腐食性ガス(二酸化硫黄、硫化水素、二酸化窒素、塩素、アンモニア、オゾンなど)の存在する環境 ● 腐食を促進する成分(塩化ナトリウムや硫黄など)や導電性の金属などが含まれている環境 取り扱い上のご注意 ...
  • Page 3 第三者への譲渡について  本製品を第三者に譲渡(または売却)するときは、必ず本書を含め全ての添付品を一緒にお渡しください。 廃棄について  本製品の廃棄については各自治体の廃棄ルールに従ってください。詳しくは、各自治体へお問い合わせ ください。防塵フィルタはプラスチックとして廃棄してください。 1.本製品使用上のご注意 ●本製品は Express5800/T110f-S、GT110f-S、iStorage NS100Td 専用オプションです。 ●本製品は 塵埃侵入防止にのみ効果が有ります。塩害、腐食性ガスには効果が有りません。 2.構成品 構成品を確認してください。 項番 品名 数量 概要 防塵ベゼル   ベゼルベース 項番 1 の本体部分 デバイスカバー 項番 1 に取り付け済み HDD カバー 項番 1 に取り付け済み 鍵(シリンダー) 項番 1 に取り付け済み ベゼルカバー 項番 1 に取り付け済み DVD カバー...
  • Page 4 ⑧          ⑪  ネジ          防塵フィルタ  ⑨    ⑫  ネームプレート        NEC Express5800/T110f-S     センサ接続用ケーブル  ⑱    ⑬  ネームプレート      目詰まり検出センサ  ⑰    NEC Express5800/GT110f-S       ⑭  ネームプレート ...
  • Page 5 3.装置への取り付け・取り外し     下記の手順にて装置に取り付けを行ってください。               ● 取り付ける装置の説明書を参照し、「安全上のご注意」、「取り扱い上のご注意」を守って 取り付け・取り外しを行ってください。 ※本製品をExpress5800/T110f-S、GT110f-Sに取り付けることにより、本体外形寸法が以下となります。 98.0 mm (幅) X 415.7 mm (奥行き) X 347.1 mm (高さ) (スタビライザ・突起物含まず) 200.0 mm (幅) X 423.0 mm (奥行き) X 347.1 mm (高さ) (スタビライザ・突起物含む) 1.  装置の電源を切り、電源ケーブルを外してください。 2. ...
  • Page 6 3. ネジを外し、下図のようにフロントベゼルの左側を引っ張り、それからツメを押して、 フロントベゼルを外してください。 ①ネジを外します。   ③ツメを押してベゼルを外します。  ①  ②フロントベゼルの左側を引っ張ります。                増設用2.5型HDDケージが実装されている場合はフロントベゼルのドアカバーを 開き、HDDケージの扉のストッパを解除してからフロントベゼルを外してください。                   ストッパを押して解除します  増設用2.5型HDDケージ  ②  ①  6 ...
  • Page 7 4. 本製品に防塵フィルタ、目詰まり検出センサ(2箇所)、センサ接続用ケーブルが下図の通 り正しく実装されていることを確認してください。 防塵フィルタ  (ベゼル内側)  目詰まり検出センサ  (ベゼルカバーを外した内側)  5. 装置前面のフロントUSBポートと光ディスクドライブの間の隙間から、 センサ接続用ケーブ ルを装置内へ引き込みます。 7 ...
  • Page 8 6. センサ接続用ケーブルは、下図を参照してフロントUSBポートの左側(S1)とLEDの右側(S2) をそれぞれ通る位置に通します。 S1  S2  7. 下図の様にセンサ接続用ケーブルのコネクタをマザーボードのコネクタに接続します。 下図 に示す矢印の向きに合わせてセンサ接続ケーブルのコネクタをマザーボード上のコネクタ に接続してください。 セ ン サ 接 続 ケ ー ブ ル コネクタ    <空冷冷却方式モデル> セ ンサ 接続用 ケーブ ル コネクタ    8 ...
  • Page 9 <水冷冷却方式モデル> センサ接続用ケーブル コネクタ    8. フロントベゼルの取り外しと逆の手順で防塵ベゼルを取り付け、その後ネジを締めます。 ③ネジを締めます。  ①  ②  ①防塵ベゼルの右側を引っ掛けて から取り付けます。  注意:防塵ベゼルを装置に取り付ける際、センサ接続用ケーブルを挟まない様、 十分注意してください。  9 ...
  • Page 10             増設用2.5型HDDケージが実装されている場合は、HDDケージの扉を外してから 防塵ベゼルを装置に取り付けてください。                   2.5型HDDが実装されている場合、 HDDケージの扉を外します。  扉を開けて、ナイロンリベットを外 してから扉を外します。  ②  ①  ③  10 ...
  • Page 11             中央のスロットに3.5型デバイスが実装されている場合は防塵ベゼルの デバイスカバーを外してから防塵ベゼルを装置に取り付けてください。                   この位置に3.5型デバイスが実装 されている場合、防塵ベゼルの  デバイスカバー  デバイスカバーを外します。  8.1 ベゼルカバーの爪部分を押してベゼルカバーを外します。 ③  ②  ①                    8.2  鍵を開けてHDDカバーを外します。 HDDカバー  ②  ①  ③ ...
  • Page 12                 8.3  デバイスカバーの爪部分を押してデバイスカバーを外します。 デバイスカバー  ②  ①                    8.4  HDDカバーを取り付け、鍵を閉め、ベゼルカバーを取り付けます ①  ②  ③  12 ...
  • Page 13 9.  取り外しと逆の手順でサイドカバーを閉じてください。 ②  ①  ③  10.  下図の斜線部にネームプレートを貼り付けてください。 空冷モデル:T110f-S、GT110f-S、NS100Td:銀  水冷モデル:T110f-S、GT110f-S:紺  13 ...
  • Page 14 4.防塵フィルタの交換 防塵フィルタの推奨使用期間は6か月、最大使用可能期間は1年となっております。 上記期間は使用環境により前後いたします。交換用防塵フィルタはN8147-23を使用してください。 ●フィルタを交換しないまま最大使用期間を超えて装置を稼働させた場合、 ほこりの目詰まり等によりデバイスの温度が上昇し装置が故障する原因となります。           1.ベゼルカバーの爪部分を押してベゼルカバーを外してください。 ②  ①  ③  2.防塵フィルタの交換   2.1  ベゼルカバーからフィルタフレームと防塵フィルタを取り外してください。 防塵フィルタ  フィルタフレーム  14 ...
  • Page 15 2.2  防塵フィルタを交換し、フィルタフレームをフィルタの上から更に はめ込んでください。 これらのツメにフィルタ及びフィルタフレーム の端面を引っ掛ける。(11箇所)  2.3  ベゼルカバーを装置に取り付けてください。 ②  ①  15 ...
  • Page 16   5.ソフトウェアのインストール 目詰まり検出ソフトウェアのインストール手順については、添付のCD-ROMのUser's Guideフォルダ内の “目詰まり検出ソフトウェア_操作説明書”をご確認ください。         【メモ】                                                               ...
  • Page 17: Precautions For Use (Be Sure To Read)

    N8146-40 Dust proof Bezel with Sensor User's Guide Preface Thank you very much for your purchase of this product. The guide is intended to allow you to install and use the product correctly and safely. Read the guide carefully before handling the product.
  • Page 18: Safety Precautions

    Safety Precautions Observe the following notes to use the product safely. WARNING   If smoke, odor, or noise is present, immediately turn off the server and disconnect the power plug from the outlet, then contact the store where you purchased the product or your maintenance service company. Using the server in such conditions may cause a fire.
  • Page 19: Notes On Using The Product

    Transfer to Third Party Make sure to provide all accessories including this manual along with the product to a third party. Disposal Dispose of this product according to all national laws and regulations. Dispose of this product as plastic garbage. 1.Notes on Using the Product ●This product is dedicated to Express5800/T110f-S server.
  • Page 20       ⑪  M3 screw         ⑨  Dust-proof filter   ⑫  Nameplate       NEC Express5800/T110f-S     ⑱    ⑬  Sensor Cable  Nameplate     Filter Replacement ⑰    Sensor  NEC Express5800/GT110f-S    ...
  • Page 21   3.Installing/Removing the Bezel to the Server     Take the steps below to install the bezel to the server.                 ●Read the sections "Safety Precautions" and "Handling precautions" in the User's Guide of the server in  ...
  • Page 22 3. Remove a screw , then pull the left side of the front bezel and push the hook as shown in figure below, then remove the front bezel. ①Remove a screw ③Push the hook then remove the ①  front bezel ②Pull the left side of the front bezel ...
  • Page 23     4. Make sure that filter is mounted on dust-proof bezel. See the figure below. Dust-proof Filter   (Inside of the bezel) Filter Replacement Sensor (Inside view remove the bezel cover) 5. Pull in the sensor cable from the gap between the optical disk drive and front USB port on the front of the server.
  • Page 24 6. Passed through each position through the left side of the front USB port (S1) and the right side of the LED (S2) the sensor cable. See the figure below. 7. The Sensor cable connect to the connector on the motherboard to match the orientation of the arrow.
  • Page 25 <Liquid cooling model> Connector for the Sensor cable.   8. Install the dust-proof bezel in reverse order of removal procedure of front bezel. ③Fix a screw ①  ①Insert two tabs at the right of dust-proof bezel   ②  Caution:Be careful to do not pinch the sensor cable when attached to the server dust-proof bezel.
  • Page 26             When 2.5-inch Hot Plug Drive Cage Kit is implemented, remove the door from the drive cage kit, then install the dust-proof front bezel.                   When 2.5-inch Hot Plug Drive Cage  ...
  • Page 27           When 3.5 type device is implemented into the central slot, remove the device cover from the dust-proof bezel then install the dust-proof front bezel.                   When 3.5 type device is implemented into this position, remove the device Device cover cover.
  • Page 28                   8.3  Push the hook of the device cover, then remove the device cover. Device cover ②  ①                    8.4  Install the HDD cover and lock the key, then install the bezel cover. ① ...
  • Page 29     9. Close the side cover in reverse order of removal procedure of side cover. ②  ①  ③  10. Stick the nameplate on the bezel shown by the slant lines in the figure below. Air-cooling model: T110f-S : Silver Water-cooling model: T110f-S : Navy blue 29 ...
  • Page 30 4.Replacement of Dust-proof Filter The service life of dust-proof filter is six months (recommended) or one year (maximum). The life time depends on usage environment. Use N8147-23 Dust-proof filter for replacement. ●If the server is operated for long time without replacing the filter, a malfunction may be generated due to the temperature rise of the device caused by clogged ...
  • Page 31 2.2 Replace of the dust-proof filter then insert the dust-proof filter and filter frame. Engage the end faces of filter and filter frame with these claws. (11 places)  2.3 Install the bezel cover to the server chassis. ②  ①  31 ...
  • Page 32   Remarks (1) No part of this manual may be reproduced in any form without the prior written permission of NEC Corporation. (2) The contents of this User's Guide may be revised without prior notice. (3) The contents of this User's Guide shall not be copied or altered without the prior written permission of NEC Corporation.