Cruising In Other Conditions; Cruising In Salt Water; Cruising In Turbid Water - Yamaha 50H Owner's Manual

EMG71710
PROCEDURE
1) Place the gear in the neutral position.
2) Pull the tilt-lock lever up to the Tilt
position.
3) Slightly tilt up the engine to the
desired position and push the tilt-lock
lever down to the Lock position.
4) To return the engine to the normal
402011
position, pull the tilt-lock lever up to
the Tilt position and slowly tilt the
engine down.
5) Push the tilt-lock lever down to the
Lock position.
EMH60010
CRUISING IN OTHER

CRUISING IN SALT WATER

After operating in salt water, wash out the
cooling-water passages with fresh water
to prevent them from becoming clogged-
up with salt deposits.
NOTE:
Refer to cooling system flushing instruc-
tions in "TRANSPORTING AND STORING
OUTBOARD MOTOR".

CRUISING IN TURBID WATER

It is strongly recommended that the
optional chromium-plated water-pump kit
be installed if the outboard is to be used
in turbid (muddy) water conditions.
3-31
CONDITIONS
GB