Play; Transmission Gear Display; Front Brake Pressure Indicator; Acceleration Indicator - Yamaha R1 Owner's Manual

Instrument and control functions
3. While the item is flashing, press
1
and hold the wheel switch for one
second.
2

Transmission gear display

This shows which gear the transmis-
3
sion is in. This model has 6 gears and a
neutral position. The neutral position is
4
indicated by the neutral indicator light
" " and by the transmission gear dis-

play "

".
5

Front brake pressure indicator

6
This shows how much braking power is
being applied to the front brakes.
7

Acceleration indicator

This shows the vehicle's forward accel-
8
eration and deceleration forces.
9

Revolution peak hold indicator

This small bar momentarily appears
10
within the tachometer to mark the most
recent peak r/min speed of the engine.
11
YRC items MODE/PWR/TCS/SCS
The current MODE (YRC mode) and its
12
related PWR, TCS and SCS settings
are shown here.
The individual settings for YRC items
PWR, TCS, SCS, LCS, QSS and LIF
can be organized into four groups and
set independently for each group.
These groups of settings are the YRC
modes MODE-A, MODE-B, MODE-C,
and MODE-D. Use the mode switch to
change YRC modes or make YRC item
setting changes from the main screen.
TIP
The YRC modes come preset from the
factory for different riding conditions.
When using the factory presets, the
suggested YRC modes are as follows.

MODE-A is suitable for track rid-
ing.

MODE-B is a softer track-riding
setting.

MODE-C is suitable for street rid-
ing.

MODE-D is suitable for touring or
rainy weather.
To change YRC modes or make setting
changes
1. Push the mode switch center but-
ton to scroll left to right and high-
light the item you want to adjust.
5-11
1
1. Mode switch "MODE"
2. Up button
3. Center button
4. Down button
2. Use the mode switch up button or
down button to change the select-
ed item value (vertical scrolling is
not possible).
TIP

Under certain conditions, such as
when the vehicle is in motion, the
throttle grip is turned, excessive
wheel slip is detected, etc., certain
YRC items cannot be adjusted.

When a YRC item is highlighted
but cannot be adjusted, the YRC
item box will return to black.
2
3
4