Advertisement
1.1 Installation Procedure
1.1.1 Turning Off the Host
Machine
Before starting the work, be sure to go through the
following in strict sequence on the host machine:
1. Hold down the control panel power switch for 3 sec
or more.
2. Go through the shutdown sequence indicated on the
screen so that the machine will be ready to be turned
off.
3. Turn off the main power switch.
4. Disconnect the power cable (from the wall outlet).
[2]
1.1.2 Replacing the Drum
Unit
1) Open the upper front cover [1].
0007-3341
[1]
[3]
[4]
F-1-1
0007-3185
2) Remove the face rubber piece [1] and the 2 screws
[2]; then, slide the front cover unit [3] to the left to
detach.
3) Remove the waste toner box [1].
4) Open the right door [1].
Chapter 1
F-1-2
F-1-3
F-1-4
1-1
Advertisement
