Table of Contents
Advertisement
NOTICE
© Copyright 2016 ABB. All rights reserved.
Taking out of operation
Shutting down the turbocharger
Fitting the cover plate
Close the opening in the turbine casing using the cover plate (A).
τ
Fasten the cover plate on the turbine casing (51000) using the fas-
τ
tening strips (51002), Verbus Ripp® Verbusripp washers (51003) and
nuts (51007) and screw it down securely on the support.
Thoroughly clean the fastening strips (51002) before fitting them. Apply
high-temperature grease to the stud threads (51006).
Operation Manual / TPS44-F.. - TPS61-F..
9
9.1
Page 116
Advertisement
Table of Contents
