GE Voluson E Series Service Manual page 67

Connection for Wi-Fi Direct Communication
Wi-Fi Direct Communication is only possible with printer type HP LaserJet M452nw, see
Note
Physical connection:
A WLAN network adapter is required.
1. Connect the power cable of the printer to an external, non-isolated power source.
2. Plug the proper WLAN adapter into an accessible USB port of the Voluson E-Series system.
Figure 3-15 Connection Scheme - Color Laser Printer (Wi-Fi Direct Communication)
Voluson E-Series Service Manual
5539550APB Revision 6
Setup Instructions
Table 9-10.
3-23