Table of Contents
Advertisement
■ To connect the Digital Piano with your computer
• Make sure you follow the steps of the procedure below exactly. Connecting incorrectly can
make data send and receive impossible.
• Be sure to turn on the Digital Piano first before starting up your computer's music software.
• USB send and receive is disabled during playback of a song.
1.
Turn off the Digital Piano and start up the computer.
• Do not start any music software yet on your computer.
2.
Connect the USB Type B port of the Digital Piano to your computer using a
commercially available USB cable.
• Use a USB 2.0 or 1.1 A-B connector type cable.
Computer port
USB Type A
3.
Turn on the Digital Piano.
• When connecting for the first time, the driver required to send and receive data is automatically
installed on the computer.
4.
Start the (commercially available) music software on your computer.
5.
Select "CASIO USB-MIDI" as the MIDI device in the settings of your computer's
music software.
• Refer to the user manual of the music software for information on how to select a MIDI device.
• After one successful connection, the USB cable can be left connected and the computer or the
Digital Piano can be turned on again.
Connection cable
EN-160
Connecting with External Devices
Digital Piano
port
USB Type B
Advertisement
Table of Contents
