Table of Contents
Advertisement
4) Select MAC Address in Board list and check at DHCP Mode.
MAC address
[Note]
- If many MAC addresses appear, refer to the MAC address on the label of
the interface card.
- Ask the Network administrator IP and its related information.
5) Set baud rate at Serial Setting.
[Note]
- The baud rate (Speed) should be same as the baud rate of the printer.
(Refer to [Appendix 1])
- Highest baud rate (Speed) can be used.
V 4.00
All manuals and user guides at all-guides.com
- 18 -
Ethernet
Advertisement
Table of Contents
