Set Pcode; Set Screen Brightness; Set Alarm; Set Dialing Method - Philips CORD026 User Manual

3.

Set PCODE

Press to enter the Settings mode� Scroll to
to enter the PCODE setting menu, the LCD displays
the "-" flashes (if the PCODE has been set, it will be displayed).
to set or change it to 0-9. Press
Press or
setting�
(Note: After a PCODE is set, when dialing back the incoming
call number, predialing or storing a phone number, if the
number has 6 or more digits and its first digit is different from
the PCODE, the PCODE will be added to the number. Each time
the PCODE is dialed, the phone will be paused automatically
for 1 second.)
4.

Set screen brightness

Press to enter the Settings mode� Scroll to
to enter screen brightness setting menu, the LCD displays
to set the screen brightness (5 levels are available).
Press or
to confirm the setting.
Press
5.

Set alarm

Press to enter the Settings mode� Scroll to
to enter alarm setting menu, the LCD displays
(hour/minute). Press
or
display. Press to save the first digit and move to the second
digit of hour. In this way, you can set the minute display. The
alarm is turned on/off by selecting ON (alarm is enabled) or
OFF (alarm is disabled). (With the alarm enabled, when the
set time is reached, the phone automatically rings for about
1 minute. Press any button to stop it. However, if the time is
reached when the phone is off-hook or a call comes in, the
alarm will be automatically canceled.)
� Press
to confirm the
� Press
to set the first digit of the hour
-7-
6.

Set dialing method

Press to enter the Settings mode� Press
and dialing method setting menu, the LCD displays
to enter the setting menu. Press
(TONE = tone dialing, which is the default setting) or
(PULSE = pulse dialing). Press
�
� Press
or scroll to the
� Press
or to select
to confirm the setting.
-8-